VALVE KIT 2243880 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Studs
30 − 3.5mm 2
B 138-7574 Link Bracket 2 Start By:
Remove the fixed axle.
Remove the axle shaft.Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This step will help to prevent dirt from entering the internal mechanism.
Illustration 1 g06120588
Illustration 2 g06120596
Illustration 3 g06120602Installation Procedure
Install the differential and bevel gear in the reverse order of removal.
Tighten bolts to a torque of 875 125 N m (645 92 lb ft). Then, turn bolts (1) an additional 120° 10°.