VALVE GP-CONTROL 2265688 - Caterpillar

Back-up Alarm
Back-up Alarm - The alarm will sound when the transmission control lever is in the reverse position. It is used to alert people behind the machine that it is backing up.The back-up alarm is located on the rear of the machine. A three position switch (high, low and medium) at the rear of the back-up alarm regulates its volume.The alarm is set at the highest sound level when shipped from the factory. The setting should remain on high, unless the job site requires a lower level.Heating and Air Conditioning Controls
Fan Control
Heat and Air Conditioning Fan Speed Switch - This switch controls the heating and air conditioning three speed blower fan motor. Off - Move the switch to the top position to stop the blower fan. Heating - Move the switch to the right to operate the heating system. First - (1) - Move the switch to this symbol for lowest fan speed. Second - (2) - Move the switch to this symbol for a medium fan speed. Third - (3) - Move the switch to this symbol for highest fan speed. Air Conditioning - Move the switch to the left to operate the air conditioning system. First - (1) - Move the switch to this symbol for lowest fan speed. Second - (2) - Move the switch to this symbol for a medium fan speed. Third - (3) - Move the switch to this symbol for highest fan speed.Temperature Control - Variable
Temperature Variable - Turn the knob to any position between heating and cooling to obtain the desired temperature.Heating and Air Conditioning System Operation
The heating and air conditioning system can perform four functions: Heating - Turn the blower fan switch to LOW, MEDIUM or HIGH speed. Adjust the temperature variable control for the desired temperature. Cooling - Turn the blower fan switch to LOW, MEDIUM or HIGH speed. Adjust the temperature variable control for the desired temperature. Pressurizing - Pressure inside of the cab will help keep dust out, when heating or cooling is not desired.Turn the temperature variable controls to OFF. Turn heating fan to either LOW, MEDIUM or HIGH speed, depending on the volume of air needed to keep out dust. Defogging - Turn the air conditioning fan to either LOW, MEDIUM or HIGH speed, depending on the volume of air needed to remove moisture from the air in the cab. This will prevent moisture from forming on the windshield and windows.Turn on the blower fan. Adjust temperature controls until moisture level is lowered. Adjust the temperature controls until it is comfortable and windshield and side windows are free of moisture.Seat
The operator's seat provided with this machine is in compliance with the appropriate class of ISO 7096. Adjust the seat at the beginning of each shift or when changing operators.Adjust the seat to allow full travel of the pedals when the operator is seated against the seat back.Contour Series Seat
Pull the backrest (1) up to remove.Armrest Adjustment
Rotate the knob (2) to adjust the angle of