2280267 VALVE GP-MODULATING Caterpillar parts
C-10, C-12, C-15
Rating:
Alternative (cross code) number:
CA2280267
228-0267
2280267
CA2280267
228-0267
2280267
Weight: 0.80 pounds 0 kg.
TRUCK ENGINE,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
ZPLKKYGR 150A Alternator for Dodge for Nitro 2007-2009 228-0267
ZPLKKYGR Fitment: for Dodge;for Nitro 2007-2009 || Part Number:56028697AG,86696E || Amperage:150 || Regulator:Internal || Built Standard: Built with high standard and care to meet industry standards for quality control, ensuring reliable and consistent performance || Material: the item is crafted using materials, carefully selected for their superior strength and durability, ensuring super-quality and performance || Efficient Power Generation: Delivers reliable electrical output to support all vehicle systems. || Strong Design: Built to withstand harsh conditions and prolonged use. || High Output Capacity: Ensures consistent battery charging and system operation. || Corrosion Withstand: Features protective coatings to avoid decay and wear.
ZPLKKYGR Fitment: for Dodge;for Nitro 2007-2009 || Part Number:56028697AG,86696E || Amperage:150 || Regulator:Internal || Built Standard: Built with high standard and care to meet industry standards for quality control, ensuring reliable and consistent performance || Material: the item is crafted using materials, carefully selected for their superior strength and durability, ensuring super-quality and performance || Efficient Power Generation: Delivers reliable electrical output to support all vehicle systems. || Strong Design: Built to withstand harsh conditions and prolonged use. || High Output Capacity: Ensures consistent battery charging and system operation. || Corrosion Withstand: Features protective coatings to avoid decay and wear.
EIDZADK 150A Alternator for Dodge for Nitro 2007-2009 228-0267
EIDZADK Fitment: for Dodge;for Nitro 2007-2009 || Part Number:56028697AG,86696E || Amperage:150 || Regulator:Internal || Built Standard: Built with high standard and care to meet industry standards for quality control, ensuring reliable and consistent performance || Material: the item is crafted using materials, carefully selected for their superior strength and durability, ensuring super-quality and performance || Efficient Power Generation: Delivers reliable electrical output to support all vehicle systems. || Strong Design: Built to withstand harsh conditions and prolonged use. || High Output Capacity: Ensures consistent battery charging and system operation. || Corrosion Withstand: Features protective coatings to avoid decay and wear.
EIDZADK Fitment: for Dodge;for Nitro 2007-2009 || Part Number:56028697AG,86696E || Amperage:150 || Regulator:Internal || Built Standard: Built with high standard and care to meet industry standards for quality control, ensuring reliable and consistent performance || Material: the item is crafted using materials, carefully selected for their superior strength and durability, ensuring super-quality and performance || Efficient Power Generation: Delivers reliable electrical output to support all vehicle systems. || Strong Design: Built to withstand harsh conditions and prolonged use. || High Output Capacity: Ensures consistent battery charging and system operation. || Corrosion Withstand: Features protective coatings to avoid decay and wear.
ALUZANBO 150A Alternator for Dodge for Nitro 2007-2009 228-0267
ALUZANBO Fitment: for Dodge;for Nitro 2007-2009 || Part Number:56028697AG,86696E || Amperage:150 || Regulator:Internal || Built Standard: Built with high standard and care to meet industry standards for quality control, ensuring reliable and consistent performance || Material: the item is crafted using materials, carefully selected for their superior strength and durability, ensuring super-quality and performance || Efficient Power Generation: Delivers reliable electrical output to support all vehicle systems. || Strong Design: Built to withstand harsh conditions and prolonged use. || High Output Capacity: Ensures consistent battery charging and system operation. || Corrosion Withstand: Features protective coatings to avoid decay and wear.
ALUZANBO Fitment: for Dodge;for Nitro 2007-2009 || Part Number:56028697AG,86696E || Amperage:150 || Regulator:Internal || Built Standard: Built with high standard and care to meet industry standards for quality control, ensuring reliable and consistent performance || Material: the item is crafted using materials, carefully selected for their superior strength and durability, ensuring super-quality and performance || Efficient Power Generation: Delivers reliable electrical output to support all vehicle systems. || Strong Design: Built to withstand harsh conditions and prolonged use. || High Output Capacity: Ensures consistent battery charging and system operation. || Corrosion Withstand: Features protective coatings to avoid decay and wear.
Number on catalog scheme:
6
For full view, you need register
Information:
Remove And Install Fuel Transfer Pump
START BY:a. remove fuel injection lines 1. Disconnect two fuel lines (1).2. Remove two bolts (2).3. Remove fuel transfer pump (3). The following steps are for installation of the fuel transfer pump.4. Put fuel transfer pump (3) in position on the fuel injection pump housing. Install two bolts (2).5. Connect two lines (1).END BY:a. install fuel injection linesDisassemble Fuel Transfer Pump
START BY:a. remove fuel transfer pump 1. Remove service meter (4) and/or tachometer drive from transfer pump cover (3).2. Remove bolts (2). Separate cover (3) and pump body (1). 3. Remove lip-type seal (6) from the cover. Remove plug (5), the seal, spring and plunger (bypass valve) from the cover. 4. Remove nut (10) from shaft (7). Remove gear (9) and key (11).5. Remove shaft (7) and gear (8) as a unit. Remove gear (8) from drive shaft (7) with a press.6. Remove idler gear (12). 7. Remove bushing (14), two lip-type seals and the bottom bearing from pump body (1).8. Remove check valve (13).Assemble Fuel Transfer Pump
1. Install bushing (4) in body (3) with tooling (B). The bushing must not be extended above the (gear) surface of the body.2. Install the check valve in the body with tooling (A).3. Install lip-type seal (5) with tooling (C). Install the seal until it is 24.6 0.5 mm (.97 .02 in.) from the bottom surface of body (3) and with the lip toward bushing (4) as shown.4. Install lip-type seal (6) with tooling (D). Install the seal until it is 14.2 0.5 mm (.56 .02 in.) from the bottom surface of body (3) and with the lip away from seal (5) as shown.5. Install bearing (7) in body (3) with tooling (E). The bearing must be even with the surface of the pump body.6. Heat gear (8) to a maximum temperature of 316°C (600°F). Install gear (8) on shaft (11) until dimension X is 49.71 0.25 mm (1.957 .010 in.).7. Install the drive shaft and gear in body (3). Install the key, gear (10) and nut (9). Tighten the nut to a torque of 28 7 N m (21 5 lb.ft.).8. Install idler gear (12) in body (3).9. Install lip-type seal (2) with tooling (C). Install the seal until it is 3.8 0.5 mm (.15 .02 in.) from the top surface of cover (1) with the lip toward the inside as shown.10. Install plunger (14) (bypass valve), spring (15) and seal and plug (13) in pump cover (1). Tighten plug (13) to a torque fo 38 4 N m (28 3 lb.ft.).
Do not let the liquid gasket enter the pump.
The drive shaft must turn freely after the bolts that hold the transfer pump together are tightened.11. Put 7M7260 Liquid Gasket Material on the surface of cover (1). Install cover (1) on pump body (3).12. Install the service meter and/or tachometer drive on cover (1).END BY:a. install fuel transfer pump
START BY:a. remove fuel injection lines 1. Disconnect two fuel lines (1).2. Remove two bolts (2).3. Remove fuel transfer pump (3). The following steps are for installation of the fuel transfer pump.4. Put fuel transfer pump (3) in position on the fuel injection pump housing. Install two bolts (2).5. Connect two lines (1).END BY:a. install fuel injection linesDisassemble Fuel Transfer Pump
START BY:a. remove fuel transfer pump 1. Remove service meter (4) and/or tachometer drive from transfer pump cover (3).2. Remove bolts (2). Separate cover (3) and pump body (1). 3. Remove lip-type seal (6) from the cover. Remove plug (5), the seal, spring and plunger (bypass valve) from the cover. 4. Remove nut (10) from shaft (7). Remove gear (9) and key (11).5. Remove shaft (7) and gear (8) as a unit. Remove gear (8) from drive shaft (7) with a press.6. Remove idler gear (12). 7. Remove bushing (14), two lip-type seals and the bottom bearing from pump body (1).8. Remove check valve (13).Assemble Fuel Transfer Pump
1. Install bushing (4) in body (3) with tooling (B). The bushing must not be extended above the (gear) surface of the body.2. Install the check valve in the body with tooling (A).3. Install lip-type seal (5) with tooling (C). Install the seal until it is 24.6 0.5 mm (.97 .02 in.) from the bottom surface of body (3) and with the lip toward bushing (4) as shown.4. Install lip-type seal (6) with tooling (D). Install the seal until it is 14.2 0.5 mm (.56 .02 in.) from the bottom surface of body (3) and with the lip away from seal (5) as shown.5. Install bearing (7) in body (3) with tooling (E). The bearing must be even with the surface of the pump body.6. Heat gear (8) to a maximum temperature of 316°C (600°F). Install gear (8) on shaft (11) until dimension X is 49.71 0.25 mm (1.957 .010 in.).7. Install the drive shaft and gear in body (3). Install the key, gear (10) and nut (9). Tighten the nut to a torque of 28 7 N m (21 5 lb.ft.).8. Install idler gear (12) in body (3).9. Install lip-type seal (2) with tooling (C). Install the seal until it is 3.8 0.5 mm (.15 .02 in.) from the top surface of cover (1) with the lip toward the inside as shown.10. Install plunger (14) (bypass valve), spring (15) and seal and plug (13) in pump cover (1). Tighten plug (13) to a torque fo 38 4 N m (28 3 lb.ft.).
Do not let the liquid gasket enter the pump.
The drive shaft must turn freely after the bolts that hold the transfer pump together are tightened.11. Put 7M7260 Liquid Gasket Material on the surface of cover (1). Install cover (1) on pump body (3).12. Install the service meter and/or tachometer drive on cover (1).END BY:a. install fuel transfer pump
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts valve Caterpillar catalog:
1693, 3406, 3406B, 3406E, 3408, 621, 621B, 623, 623B, 627, 627B, 631C, 633C, 637, 641, 641B, 650B, 651, 651E, 657, 657B, 657E, 666, 666B, 768B, 769, 772, 773, 776C, 776D, 777B, 777D, C-15, C-16
140H, 143H, 14H, 160H, 163H, 16H, 3176C, 3196, 3406E, 3456, 345B, 345B II, 385B, 385C, 480, 5090B, 621G, 623G, 627G, 735, 740, 824G II, 825G II, 826G II, 834G, 836G, 966G II, 972G II, 980G II, 988G, C...
140H, 143H, 14H, 14M, 160H, 163H, 16H, 16M, 24M, 3176C, 3196, 3406E, 3456, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 365B, 365B II, 365B L, 365C,...
16G, 16H NA, 245, 245B, 307, 311, 3116, 312, 3126, 3126B, 3126E, 312D, 312D L, 314D CR, 314D LCR, 315, 317, 3176, 3176B, 3176C, 318D L, 3196, 320 L, 3208, 320D, 320D FM, 320D L, 320D LRR, 320D RR, 320...
120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 14H, 14H NA, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 1673C, 16G, 16H, 16H NA, 3126, 3126B, 3126E, 31...
3114, 3116, 3126B, 3176, 3176B, 3176C, 3196, 3406B, 3412E, 35, 3512, 45, 55, 613C, 613C II, 613G, 69D, 936, 936F, 980F, 980G, AD30, AD40, AD45, AD55, AE40, AE40 II, AP-1000B, AP-1055B, AP-1055D, AP-90...
140H, 143H, 14H, 160H, 163H, 16H, 3176, 3176B, 3176C, 3196, 345B, 345B II, 345B II MH, 345B L, 365B, 365B II, 365B L, 480, 572R II, 65E, 725, 730, 75C, 75E, 814F, 815F, 816F, 85C, 85D, 85E, 95E, 966G ...
24M, 3406E, 3456, 365C, 365C L, 365C L MH, 374D L, 374F L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 583T, 587T, 621B, 621G, 623G, 627F, 627G, 631D, 631E, 631G, 633E II, 637D, 637E...
24M, 3406E, 3456, 365C, 365C L, 365C L MH, 374D L, 374F L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B, 583T, 587T, 621B, 621G, 623G, 627F, 627G, 631D, 631E, 631G, 633E II, 637...
24M, 3406E, 3456, 365C, 365C L, 365C L MH, 385B, 385C, 385C FS, 385C L, 385C L MH, 5090B, 583T, 587T, 621G, 623G, 627F, 627G, 631D, 631G, 637G, 651B, 657B, 657E, 657G, 735, 740, 770, 772, 773F, 773G, ...
3176C, C-10, C-12, CPT372, R1600, R1600G, R1700G, SBF214, SUF557
120B, 120G, 12G, 130G, 140B, 1673C, 1674, 1676, 1693, 215, 225, 235, 3160, 3176, 3176B, 3176C, 3196, 3208, 3304, 3306, 518, 627B, 637D, 910, 920, 930, 931B, 931C, 941, 950, 951B, 955K, 955L, 966C, 977...
1G9128
VALVE & MOUNTING
CP-563, CS-533, CS-583
CP-563, CS-533, CS-583
9P0122
VALVE GP-PRESSURE CONTROL
651E, 657E, 657G
651E, 657E, 657G
2970503
VALVE GP-CHECK
320D, 320D FM, 320D GC, 320D L, 323D L, 323D LN
320D, 320D FM, 320D GC, 320D L, 323D L, 323D LN
4T2513
VALVE GP
926, 926A, G926, IT28, IT28B
926, 926A, G926, IT28, IT28B
2605411
VALVE & MTG GP-SOLENOID
906H, 906H2, 907H, 907H2, 908H, 908H2
906H, 906H2, 907H, 907H2, 908H, 908H2
9J5825
VALVE GP-BANK 4
D3, D3B, D4B
D3, D3B, D4B
1483551
VALVE GP-SOLENOID
564, 574, 574B, 621H, 623H, 627H, 938H, IT38H
564, 574, 574B, 621H, 623H, 627H, 938H, IT38H
1458711
VALVE GP-PILOT CARTRIDGE
924G, 924GZ, 938G II, 950G, 950G II, 962G, 962G II
924G, 924GZ, 938G II, 950G, 950G II, 962G, 962G II
1306224
VALVE GP-PUMP CONTROL
918F, 924F, IT24F
918F, 924F, IT24F
1U2230
VALVE GP-STEERING
814B, 815B, 816B
814B, 815B, 816B