VALVE GP-RELIEF 2340351 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7574     Link Bracket     2    
B     1U-9200     Lever Puller Hoist     1    
Keep all parts clean from contaminants.Contamination of the hydraulic system with foreign material will reduce the service life of the hydraulic system components.To prevent contaminants from entering the hydraulic system, always plug or cap the lines, fittings, or hoses as they are disconnected. Cover any disassembled components and clean them properly before assembly.Clean the hydraulic system properly after any major component exchange or especially after a component failure, to remove any contamination.
Illustration 1 g00833981
Install Tooling (A), Tooling (B), and a suitable lifting device, as shown.
Position the transmission, the torque converter and the transfer gears to the differential as a unit. The weight of the unit is approximately 1315 kg (2900 lb).
Illustration 2 g01101482
Install nuts (11) and bolts (12) .
Illustration 3 g00825824
Connect hose assembly (10) .
Illustration 4 g00825809
Connect hose assembly (9) .
Illustration 5 g00825804
Connect hose assemblies (8) .
Illustration 6 g01101239
Install clip (7) .
Connect harness assembly (6) .
Install clips (4). Connect harness assembly (5) .
Illustration 7 g00825793
Connect harness assembly (3) .
Illustration 8 g00825787
Install drain plugs (1) and drain plug (2). Refill the transmission oil and the differential oil. Refer to Operation and Maintenance Manual, "Lubricant Viscosities and Refill Capacities".
Install the cushion-hitch pump. Refer to Machine Systems Disassembly and Assembly, "Piston Pump (Cushion-Hitch) - Install".
Install the drive shaft. Refer to Disassembly and Assembly, "Drive Shaft - Remove and Install".
Install the vane pump for the hydraulic system and the steering system. Refer to Machine Systems Disassembly and Assembly, "Vane Pump (Hydraulic and Steering) - Install".
Install the power train guard. Refer to Disassembly and Assembly, "Power Train Guard (Transmission) - Remove and Install".