2350323 VALVE GP-ACCUMULATOR CHARGING Caterpillar parts
825G II, 825H, 826G II, 826H
Rating:
Alternative (cross code) number:
CA2350323
235-0323
2350323
CA2350323
235-0323
2350323
Weight: 9 pounds 4 kg.
LANDFILL COMPACTOR, SOIL COMPACTOR,
Compatible equipment models: 2350323:
Number on catalog scheme:
23
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the fan.
At operating temperature, the engine coolant is hot and under pressure.Steam can cause personal injury.Check the coolant level only after the engine has been stopped and the filler cap is cool enough to touch with the bare hand.Remove the filler cap slowly to relieve pressure.Cooling system conditioner contains alkali. Avoid contact with skin and eyes to prevent personal injury.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining and filling procedures.
Illustration 1 g06315053
Remove belt (1). Refer to Operation and Maintenance Manual, "Belt - Inspect / Adjust / Replace" for the correct procedure.
Illustration 2 g06315055
Remove bolts (2) and pulley (3).
Illustration 3 g06315056
Remove bolts (4), water pump (5), and the gasket.Installation Procedure
Install water pump (5) in the reverse order of removal.
Apply engine oil to the water pump seal face.
Apply fresh liquid sealant over the mating surfaces of water pump (5).
Tighten bolts (4) to a torque of 22.5 3.5 N.m (199.1 31.0 lb in).
Tighten bolts (2) to a torque of 18.5 3.5 N.m (163.7 31.0 lb in).
Start By:
Remove the fan.
At operating temperature, the engine coolant is hot and under pressure.Steam can cause personal injury.Check the coolant level only after the engine has been stopped and the filler cap is cool enough to touch with the bare hand.Remove the filler cap slowly to relieve pressure.Cooling system conditioner contains alkali. Avoid contact with skin and eyes to prevent personal injury.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining and filling procedures.
Illustration 1 g06315053
Remove belt (1). Refer to Operation and Maintenance Manual, "Belt - Inspect / Adjust / Replace" for the correct procedure.
Illustration 2 g06315055
Remove bolts (2) and pulley (3).
Illustration 3 g06315056
Remove bolts (4), water pump (5), and the gasket.Installation Procedure
Install water pump (5) in the reverse order of removal.
Apply engine oil to the water pump seal face.
Apply fresh liquid sealant over the mating surfaces of water pump (5).
Tighten bolts (4) to a torque of 22.5 3.5 N.m (199.1 31.0 lb in).
Tighten bolts (2) to a torque of 18.5 3.5 N.m (163.7 31.0 lb in).
Caterpillar parts catalog:
Parts valve Caterpillar catalog:
6E4642
VALVE GP
D8R II
D8R II
1790124
VALVE GP-RELIEF
D10N, D10R, D10T
D10N, D10R, D10T
1770273
VALVE
D10R
D10R
2764832
VALVE GP-DIVERTER
D10R, D10T, D11R, D11T
D10R, D10T, D11R, D11T
1598968
VALVE GP-CHECK
836G, 836H
836G, 836H
D10T, D11T, D8T, D9T
2354101
VALVE GP-RELIEF
D10N, D10R, D10T, D9T
D10N, D10R, D10T, D9T
1947658
VALVE GP-BRAKE CONTROL
815F, 815F II, 816F, 816F II
815F, 815F II, 816F, 816F II
2792326
VALVE-PRESSURE REDUCING
814F, 814F II, 815F, 815F II, 816F, 816F II
814F, 814F II, 815F, 815F II, 816F, 816F II
3549003
VALVE GP-CONTROL
836G, 836H
836G, 836H
2350252
VALVE GP-ACCUMULATOR CHARGING
836G, 836H
836G, 836H