2380750 VALVE GP-SOLENOID AND MANIFOLD Caterpillar parts
320C, 320D L
Rating:
Alternative (cross code) number:
CA2380750
238-0750
2380750
CA2380750
238-0750
2380750
EXCAVATOR,
Number on catalog scheme:
1
For full view, you need register
Information:
Illustration 34 g00506732
Install teflon seal rings (80) and (82) on piston (81). The lip of the teflon seal rings should be toward the housing. Place clean oil on the lip of the seals.
Install piston (81) in housing (77) .
Illustration 35 g00506734
Install three springs (85) in housing (77). Use the following steps.
Install the first spring so that the outside diameter of the spring contacts the housing.
Install the next two springs so that the outside diameter of the springs are in contact with each other.
Install ring (84) on top of the springs, and place in a press.
Compress springs (85) until retaining ring (83) can be installed. Install retaining ring (83). Be sure that the retaining ring is seated in the groove in housing (77). Slowly release the pressure from the press. Remove the housing from the press.
Illustration 36 g00506737
Install housing (77) in gear (74). Install retaining ring (86) .
Install ten springs (87) .
Illustration 37 g00506739
The notch at location (X) must be installed down, as shown.
Use Tooling (A), and install bearing (90) in manifold (88). Install bearing (90) so that the notch that is at location (X) is down.
Use Tooling (A), and install retaining ring (89) .
Illustration 38 g00506740
The notch in bearing (90) at location (X) must be aligned with the locating dowel in housing (77) .
Install Tooling (K), and attach a hoist to Tooling (K). Align the notch at location (X) in bearing (90). Align with the locating dowel in housing (77). Install manifold (88). Remove Tooling (K) .
Install ten bolts (92). Tighten the bolts to a torque of 115 7 N m (85 5 lb ft).
Use Tooling (C), and install retaining ring (91) .
Illustration 39 g00506741
Install the suction screen in cover (94). Place the O-ring seal and cover (93) in position, and install the four bolts.
Illustration 40 g00506742
Install Tooling (K), and attach a hoist to Tooling (K). Remove the planetary assembly from Tooling (E). Place transmission cover (94) in position on Tooling (E). Place the planetary assembly in position on cover (94), and install 21 bolts (95) .
Illustration 41 g00506743
Install the O-ring seal on tube (96). Place tube (96) in position, and install bolt (97) .
Illustration 42 g00506744
Install Tooling (L) on the transmission control valves, and attach a hoist to Tooling (L). Place the transmission control valves in position on the planetary assembly, and install four bolts (98). Tighten four bolts (98) to a torque of 48 4 N m (35 3 lb ft).
Illustration 43 g00506745
Install the O-ring seals on tubes (100). Install tubes (100) in the cover and the priority valve. Install the springs and two plugs (101) .
Install the O-ring seal on tube (99). Place tube (99) in position in the cover and tube (96). Install the clip and bolt (102). Install plug (103) .
Illustration 44 g00506746
Install four small O-ring seals (104) and (105) .
Install large O-ring seal (106) .End By: Connect the transmission and bevel gear.
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts valve Caterpillar catalog:
318C, 319C, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D L, 321C, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D L, 325B L, 325C, 325C FM, 325D, 325D FM, 325D L, 329D, 329D L, 330B L, 330C, 3...
307B, 307C, 308C, 311B, 311C, 311D LRR, 311F LRR, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313B, 313D, 313D2, 313D2 LGP, 314C, 314D CR, 314D LCR, 314E CR, 314E...
307D, 308D, 311B, 311C, 311D LRR, 311F LRR, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315B, ...
307B, 307C, 311C, 311D LRR, 312C, 312C L, 312D, 312D L, 312E, 312E L, 314C, 314D LCR, 315C, 315D L, 318C, 319C, 319D, 319D L, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D L, 320D LN, 3...
311D LRR, 311F LRR, 312C, 312C L, 312D L, 312E, 314D LCR, 314E CR, 314E LCR, 315C, 316E L, 318C, 318E L, 319C, 319D L, 320C, 320D, 320D FM, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L...
2380751
VALVE GP-SOLENOID & PRESS REDC
311D LRR, 312D, 312D L, 313D, 315D L, 318D L, 320C, 320D L
311D LRR, 312D, 312D L, 313D, 315D L, 318D L, 320C, 320D L
1486218
VALVE GP-PRESSURE REDUCING
311C, 312C, 312C L, 315C, 320C, 320D L, 349E L, 349E L VG
311C, 312C, 312C L, 315C, 320C, 320D L, 349E L, 349E L VG
318C, 320C, 320C FM, 320D, 320D L, 320D LN, 320D LRR, 320D RR, 321C, 321D LCR, 322C, 323D L, 324D, 324D L, 325C, 329D, 329D L, 330C, 330C L, 330D L, 336D, 336D L, 336D2, 336D2 L, M325C MH, M325D L MH,...
312C, 312C L, 315C, 318C, 319C, 320C, 320C FM, 320C L, 320D, 320D FM RR, 320D LN, 320D LRR, 320D RR, 321C, 321D LCR, 322C, 323D L, 323D LN, 324D, 325C, 325D, 325D L, 330C, 330C L, 330D, 330D L
1710037
VALVE
311D LRR, 311F LRR, 312C, 312C L, 312D L, 312E, 314D LCR, 314E CR, 314E LCR, 315C, 316E L, 318C, 318E L, 319C, 319D L, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN,...
311D LRR, 311F LRR, 312C, 312C L, 312D L, 312E, 314D LCR, 314E CR, 314E LCR, 315C, 316E L, 318C, 318E L, 319C, 319D L, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN,...
1710094
VALVE
318C, 320C, 321C, 322C, 322C FM, 323D L, 323D LN, 324D, 324D L, 324D LN, 325C, 325C FM, 325D, 325D L, 329D, 329D L, 329D LN, 330C, 330D, 330D L, 330D LN, 336D L
318C, 320C, 321C, 322C, 322C FM, 323D L, 323D LN, 324D, 324D L, 324D LN, 325C, 325C FM, 325D, 325D L, 329D, 329D L, 329D LN, 330C, 330D, 330D L, 330D LN, 336D L
2757343
VALVE AS
320C
320C
0942996
VALVE GP-CHECK
330D L, 345C, 375, E200B, E240C, E300, EL240B
330D L, 345C, 375, E200B, E240C, E300, EL240B
2095917
VALVE GP-COUNTERBALANCE
315D L, 318C, 319C, 319D, 319D LN, 320C, 320D, 320D FM, 320D FM RR, 320D L, 323D L, 323D LN, 325C, 325D L, 330C L, 330D L, 336D L
315D L, 318C, 319C, 319D, 319D LN, 320C, 320D, 320D FM, 320D FM RR, 320D L, 323D L, 323D LN, 325C, 325D L, 330C L, 330D L, 336D L
2327226
VALVE-SHUTOFF
324D L, 325D L, 325D MH, 330D, 330D L, 330D MH, 336D L, 345C, 345C L, 345C MH, 365C, 365C L, 385C L, M325D L MH, M325D MH, M330D
324D L, 325D L, 325D MH, 330D, 330D L, 330D MH, 336D L, 345C, 345C L, 345C MH, 365C, 365C L, 385C L, M325D L MH, M325D MH, M330D
2887620
VALVE GP-BANK
324D L, 330D L
324D L, 330D L