VALVE GP-CONTROL 2384832 - Caterpillar

Illustration 9 g01222489
Install barrel (36), bearing (35), retainer (34), and pistons (33) .
Illustration 10 g01222488
Install swashplate (32) and O-ring seal (31) into housing (30) .
Illustration 11 g01222487
Install gasket (27), shaft (28), and shim (29) .
Illustration 12 g01222486
Install bearing (26), bearings (24), screws (25), and O-ring seal (23) .
Illustration 13 g01222484
Install lip seal (22) .
Use Tooling (A) in order to install retaining ring (21) .
Illustration 14 g01222482
Install cover (20) and bolts (19) .
Illustration 15 g01222481
Install gears (17) into housing (18) .
Illustration 16 g01222478
Install O-ring seals (16) .
Illustration 17 g01222477
Install cover (14) and bolts (15) .
Illustration 18 g01222474
Install O-ring seals (13) .
Illustration 19 g01222473
Install gear pump (12) and two bolts (11) .
Illustration 20 g01222471
Install O-ring seals (10) .
Illustration 21 g01222469
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install spool (4), retainer (5), retainer (6), spring (7), O-ring seal (9), and plug (8) .
Illustration 22 g01222466
Install plug (3), valve (2), and bolts (1) .End By: Install the hydraulic pump. Refer to , "Main Hydraulic Pump - Install".