VALVE GP- 2426881 - Caterpillar

Explosion Hazard! Improper jumper cable connections can cause an explosion resulting in serious injury or death. Batteries may be located in separate compartments. Refer to the Operation and Maintenance Manual for the correct jump starting procedure.
Fall Hazard (8)This safety message is located on the right and left sides of the radiator overflow tank. In addition to the radiator overflow tank, this safety message is also located on the battery enclosure cover that is mounted to the right platform on SND (XQ) machines only.
Illustration 12 g01393287
Do not use this surface as a step or platform. This surface may not support additional weight or may be slippery. Serious injury or death could occur from a fall.
Truck Body Retaining Cables (9)This safety message is located on the rear of the machine near the connection points for the truck body retaining cables.
Illustration 13 g01962775
When it is necessary to work under the machine with the body (bed) raised, attach the body (bed) retaining cables to the body retaining pins. Install the body retaining pins through the ends of the retaining cables. Always use both retaining cables.Failure to properly secure the body (bed) may result in personal injury or death.
High Pressure Cylinder (10)This safety message is located on each of the four suspension cylinders.
Illustration 14 g01370912
Pressurized System!Hydraulic accumulators contain gas and oil under high pressure. DO NOT disconnect lines or disassemble any component of a pressurized accumulator. All gas pre-charge must be removed from the accumulator as instructed by the service manual before servicing the accumulator or any accumulator component.Failure to follow the instructions and warnings could result in personal injury or death.Only use dry nitrogen gas to recharge accumulators. See your Cat dealer for special equipment and detailed information for accumulator service and charging.
Crushing Hazard (11)This safety message is located on each of the four suspension cylinders.
Illustration 15 g01370911
HIGH PRESSURE CYLINDERDo not remove any valve, hydraulic fitting, or valve core, nor disassemble any parts until pressure has been relieved.To relieve pressure, truck frame must be properly supported. Failure to comply with this warning will cause unexpected machine movement resulting in serious injury or death.Refer to your Service Manual for correct procedures for relieving pressure and/or correct charging procedures.See your Caterpillar dealer who has tools and detailed information for servicing and charging cylinders.
High Pressure Fuel Lines (12)This safety message is located on the engine mounted high-pressure fuel pump.
Illustration 16 g01381180
Contact to high pressure fuel can cause personal injury or death. Do not allow high pressure fuel to contact your skin.
Refer to Operation and Maintenance Manual, "System Pressure Release" for information on relieving pressure from the fuel system.Attach Safety Lanyard (13)This safety message is located next to the lanyard fixing points. Lanyard fixing points are located on the bottom of the dump body and the upper portions of the frame.
Illustration 17 g03347373
Falling Hazard. May cause personal injury or death. Always attach safety lanyard to appropriate fixing point.