VALVE GP-BANK 2428185 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9U-7692 Threaded Rod 2 Start By:
Remove the counterbalance valve.
Keep all parts clean from contaminants.Contamination of the hydraulic system with foreign material will reduce the service life of the hydraulic system components.To prevent contaminants from entering the hydraulic system, always plug or cap the lines, fittings, or hoses as they are disconnected. Cover any disassembled components and clean them properly before assembly.Clean the hydraulic system properly after any major component exchange or especially after a component failure, to remove any contamination.
Drain the oil from the final drive into a suitable container for storage or disposal.
Illustration 1 g00707275
Disconnect hose assemblies (1) and (3). Remove two bolts (2).
Illustration 2 g00944825
Install Tooling (A) in the place of bolts (2).
Remove remaining bolt (2A) that secures travel motor (4) to the final drive.
Illustration 3 g00707267
Attach a suitable lifting device to travel motor (4). The weight of travel motor (4) is approximately 57 kg (125 lb). Carefully pull travel motor (4) out of the final drive.
Illustration 4 g00651795
Remove O-ring seal (5) from the travel motor.