VALVE GP-SOLENOID 2476462 - Caterpillar

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00287529
Typical ExampleFront Axle
Illustration 2 g00287531
Typical ExampleRear AxleNote: The axle housings are equipped with magnetic drain plugs.
Remove drain plugs (2). Allow the oil to drain into a suitable container.
Clean the drain plugs and install the drain plugs.
Wipe off dipstick/fill plugs (1) and the surfaces around dipstick/fill plugs (1) .
Remove the dipstick/fill plugs. Fill the axles with oil.Reference: Refer to Operation and Maintenance Manual, "Capacities (Refill)" for the type of lubricant and for the refill capacity.
Clean the dipstick/fill plugs and install the dipstick/fill plugs.
Run the machine on level ground for a few minutes in order to equalize the oil level in the axle. Check the oil level in the axle.Reference: Refer to Operation and Maintenance Manual, "Differential and Final Drive Oil Level - Check" for the correct procedure.