VALVE GP-SOL 2485523 - Caterpillar

Illustration 1 g03646066
Table 1
Specification for 240-4664 Differential and Bevel Gear Gp
Item Qty Part Specification Description
1 20 160-8510 Self-Locking Bolt Torque to 230 40 N m (170 30 lb ft).
Turn an additional angle of 120 10 degrees.
2 16 6V-5686 Bolt Torque to 270 40 N m (199 30 lb ft).
3 1 108-8369 Adjustment Ring Acceptable overall rolling torque to 4.5 to 6.8 N m (39.8 to 60.2 lb in).
4 2 6V-8132 Bolt Torque to 900 100 N m (664 74 lb ft).
5 1 9S-4185 O-Ring Plug Torque to 70 to 77 N m (52 to 57 lb ft).
6 24 282-0945 Bolt Torque to 130 10 N m (96 7 lb ft).
Turn an additional angle of 120 10 degrees.
7 1 112-5936 Bevel Gear Set Assembled backlash is 0.36 0.12 mm (0.014 0.005 inch).
8 2 8T-0370 Bolt Torque to 1800 200 N m (1328 148 lb ft).
Illustration 2 g03646067
232-7553 Differential Gp
Table 2
Item Qty Part Specification Description
9 4 149-2915 Bushing Outside diameter is 44.686 0.013 mm (1.7593 0.0005 inch).
Thickness is 3.288 0.013 mm (0.1295 0.0005 inch).
10 2 208-7535 Thrust Washer All contact surface area to be clean and dry. Clean with Solvo-clean 68-0 or equivalent.
Apply green Loctite 620 to case assembly where washer will contact.
Assemble the washer with screws finger tight and torque two opposite sides.
11 8 127-1960 Flat Head Screw Apply sufficient green Loctite 620 to lock threads and bond screw head to washer.
12 12 8T-0207 Bolt Torque to 300 40 N m (221 30 lb ft).