VALVE GP-BANK 7 2500571 - Caterpillar

1. Put identification marks on the alternator wiring, and disconnect them from the alternator.2. Loosen adjustment rod nut (3), and remove the V-belts from the alternator pulley. 3. Remove bolts (2) and (4). Remove alternator group (1). The following steps are for installation of the alternator.4. Put alternator group (1) in position on its mounting bracket.5. Install bolts (2) and (4).6. Install the V-belts on the alternator pulley.7. Tighten nut (3) on the adjustment rod to make an adjustment to the V-belts. Measure the outside belt with a belt tension gauge such as Borroughs Tool Company Part No. BT-33-96-4-16or an equivalent. The correct gauge indication is 120 5. For more detailed information, see the topic "Belt Tension Chart" in the Specifications Manual.