2573252 VALVE GP-SOLENOID Caterpillar parts
RM-300, RM-500
Rating:
Alternative (cross code) number:
CA2573252
257-3252
2573252
CA2573252
257-3252
2573252
Weight: 4 pounds 2 kg.
RECLAIMER MIXER,
This part in 2 request:
Show.
This information for suppliers only!
2024-02-09
2024-01-16
Number on catalog scheme:
1
For full view, you need register
Information:
Illustration 1 g00983925
Pump compartment (1) Pressure tap for drive pump (delivery pressure) (2) Pressure tap for idler pump ( delivery pressure) (3) Pressure tap (power shift pressure)
Connect a 60000 kPa (8700 psi) pressure gauge to pressure tap (1) .
Connect a 60000 kPa (8700 psi) pressure gauge to pressure tap (2) .
Illustration 2 g00771352
(4) Boom (5) Stick (6) Ball valve for work tool
Close the ball valve for the work tool at the end of the stick.
Turn the disconnect switch to the ON position.
Illustration 3 g00685772
(7) Up key (8) Left key (9) Right key (10) Down key (11) Cancel key (12) Set key (13) Menu key (14) OK key
Illustration 4 g00783871
Default display screen
Turn the key switch to the ON position. The default display will show on the display area.
Illustration 5 g00786650
Main menu display
Press Menu key (13) in order to change from the default display to the main menu display.
Press Down key (10) in order to highlight the "Select Tool" option. When the "Select Tool" option is highlighted, press OK key (14) .
The current tool is shown. After a few seconds, you will be prompted to enter a password.
Illustration 6 g00786656
Press Left key (8) or Right key (9) in order to select the desired position. Press Up key (7) or Down key (10) in order to input the password.Note: The password is alphanumeric. You may choose from "0" to "9". You may choose from "A" to "F". The initial password is "0001".
Press OK key (14) when you finish entering the password.
Illustration 7 g00786666
The tool that is selected is shown after entering the "Select Tool" menu.
Press Right key (9) or Left key (8) in order to scroll through the different tools. Highlight the correct auxiliary tool and press Set key (12) .
Start the engine.
Place the machine controls at the following settings: the engine speed dial at "10" and the AEC switch OFF. Refer to Testing and Adjusting, "Engine Performance Test" for engine rpm settings.
Increase the hydraulic oil temperature to 55° 5°C (131° 9°F).
Illustration 8 g00772513
(14) Line relief valve
Illustration 9 g00885044
(15) Locknut (16) Adjustment screw
Activate the hydraulic circuit for one-way flow and read the gauge. The pressure must be set to the pressure that is recommended by the manufacturer of the work tool plus 3447 kPa (500 psi).
Illustration 10 g00804880
(15) Locknut (16) Adjustment screwNote: Refer to Service Manual, "Engine And Pump Electronic Control System" for additional information on Service Mode.Note: The pressure setting from the factory for the line relief valves in the hydraulic circuit for one-way flow is 20600 1500 kPa (2990 220 psi).
If the pressure gauge reading
Caterpillar parts catalog:
Parts valve Caterpillar catalog:
1090, 1190, 1190T, 120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 1290T, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 1390, 140B, 140G, 140H, 140H ES, 1...
1090, 1190, 1190T, 120G, 120H, 120H ES, 120H NA, 120M, 1290T, 12G, 12H ES, 12H NA, 12M, 130G, 135H, 135H NA, 1390, 140G, 140H ES, 140H NA, 143H, 14H, 14H NA, 160H ES, 160H NA, 163H NA, 16G, 16H NA, 16...
1090, 1190, 1190T, 120K, 120K 2, 120M, 120M 2, 1290T, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 1390, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 214B, 2...
24M, 3406E, 3456, 365C, 365C L, 365C L MH, 374D L, 374F L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 583T, 587T, 621B, 621G, 623G, 627F, 627G, 631D, 631E, 631G, 633E II, 637D, 637E...
24M, 3406E, 3456, 365C, 365C L, 365C L MH, 374D L, 374F L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B, 583T, 587T, 621B, 621G, 623G, 627F, 627G, 631D, 631E, 631G, 633E II, 637...
24M, 3406E, 3456, 365C, 365C L, 365C L MH, 385B, 385C, 385C FS, 385C L, 385C L MH, 5090B, 583T, 587T, 621G, 623G, 627F, 627G, 631D, 631G, 637G, 651B, 657B, 657E, 657G, 735, 740, 770, 772, 773F, 773G, ...
1090, 1190, 1190T, 120H, 120H ES, 120H NA, 120K, 120K 2, 1290T, 12H, 12K, 135H, 135H NA, 1390, 140H, 140K, 140K 2, 143H, 14H, 160H, 160K, 163H, 16H, 216B, 216B3, 226B, 226B3, 2290, 232B, 236B, 236B3, ...
1090, 1190, 1190T, 120H, 120K, 120K 2, 1290T, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 1390, 140G, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160K, 160M 2, 160M 3, 160M 3 AWD, 16M, 236D, 242...
3126E, 3208, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130, 5130B, 5230, 5230B, 613C, 933, 933C, 938G, 939, 939C, 950F, 950F II, 950G, 953C, 960F, 962G, AP-200B, AP-800C, AP-800D, B...
14M, 16M, 345C, 345C L, 345C MH, 345D, 345D L, 349D L, 725, 730, 966H, 972H, C11, C13, C13 XQ350, CX31-C13I, D8N, R1700G, RM-300, TH35-C13I, W345C MH
14M, 16M, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 725, 730, 966H, 972H, 980C, C11, C13, C13 XQ350, CX31-C13I, D8N, R1600H, R1700G, RM-300, TH35-C11I, TH35-C13I, W345C MH
14M, 16M, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 621H, 621K, 623H, 623K, 623K LRC, 627H, 627K, 627K LRC, 725, 730, 730C, 966H, 972H,...
2558042
VALVE GP-RELIEF
RM-300, RM-500
RM-300, RM-500
2558053
VALVE GP-PRESSURE REDUCING
RM-300, RM-500
RM-300, RM-500
2558052
VALVE GP-RELIEF
RM-300, RM-500
RM-300, RM-500
2558051
VALVE GP-SOLENOID
RM-300, RM-500
RM-300, RM-500
2556411
VALVE GP-RELIEF
RM-500
RM-500
2862221
VALVE-COUNTERBALANCE
RM-300, RM-500
RM-300, RM-500
2573254
VALVE-DIFFERENTIAL
RM-300, RM-500
RM-300, RM-500
2573247
VALVE-DIFFERENTIAL
RM-300, RM-500
RM-300, RM-500
2573245
VALVE GP-SOLENOID
RM-300, RM-500
RM-300, RM-500
2573255
VALVE-CHECK
RM-300, RM-500
RM-300, RM-500