VALVE GP-CONTROL 2596731 - Caterpillar

New Valve Speed Dialog
The valve speed functionality for 2-D systems has been updated to allow users to swap combinations of sensors quickly without having to change valve speeds. This software provides the following three valve speed options for 2-D configuration that include slope sensors:Left elevation - This option allows the user to configure the valve speed for an elevations sensor on the left side of the machine.Right elevation - This option allows the user to configure the valve speed for an elevations sensor on the right side of the machine.Slope - This option allows the user to configure the valve speed for the slope side (left or right). This configuration is independent of the elevation valve speed.Cross Coupling
The user has the ability to edit the cross coupling. For most situations, operators will use the default setting "On" for best performance.The "Off" setting may be used when working in very hard material. An example is where the elevations side is having a difficult time getting down to grade.New Compactor Features
The software provides a new mapping selection that allows the following maps to be mapped at the same time: cut/fill, Compaction Meter Value (CMV) and coverage.Minimum Level for Version of Software
Table 1
AccuGrade 3-D Software, Version 11.20    
Model    Part Number    Description    Version    
CD700     244-1716     Monitor Display Gp     11.20    
AS400C     226-9170     Position Sensor Gp     3.04    
AS400TC     276-6146     Position Sensor As     3.04    
AS450     312-0754     Position Sensor As     1.51 and 2.27    
AS460     312-0755     Position Sensor As     1.51 and 2.27    
RS400C     244-1714     Position Sensor Gp     1.89    
MS980C     244-1717     Satellite Receiver As     1.50    
MS990C     291-1913     Satellite Receiver As     4.12    
TC900B             2.80    
TC900C             3.20    
TC450             1.28    
TC2400C             1.08    
CRxxxx             5.10    
LR400C     226-2334     Laser Receiver Gp     1.83    
LR410C     253-8329     Laser Receiver Gp     1.98    
LC450     312-0756     Laser Receiver As     1.51 and 2.27    
EM400C     226-2333     Mast Gp     1.86    
EM400 Loader             1.51    
MT900C     291-1915     Laser Target As     1.10    
ST400C     253-8330     Sonic Sensor As     1.03    Table 1 lists the minimum levels for the version of software that are required for the AccuGrade components. If version 11.20 of the AccuGrade software is used with system components that have older versions of software, the "Diagnostics" screen will be displayed. The "Diagnostics" screen will show the correct version of software that is required.ReferenceRefer to the applicable Systems Operation, Troubleshooting, Testing and Adjusting, "Display Firmware Upgrade" for detailed information of upgrading the firmware for the