VALVE GP-CONTROL 2596738 - Caterpillar

TYPE="TABLE" @@@-->
Illustration 1 g02156009
View of the right side of a C18 Marine Engine
Illustration 2 g02156011
View of the left side of a C18 Marine Engine
Universal Warning (1)
One safety message is located on the valve cover base in front of the connector for the electronic control module (ECM) on the left side of the engine. One safety message is located on the front valve cover base on the right side of the engine.
Illustration 3 g01370904
Do not operate or work on this machine unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.
Hot Fluid Under Pressure (2)
The safety message is located next to the fill cap for the expansion tank.
Illustration 4 g01371640
Pressurized system! Hot coolant can cause serious burns, injury or death. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure. Read and understand the Operation and Maintenance Manual before performing any cooling system maintenance.
Explosion Hazard (3)
The safety message is located on the cover for the air cleaner (if equipped).
Illustration 5 g01372254
Explosion hazard! Do not use ether! This machine is equipped with an air inlet heater. Using ether can create explosions or fires that can cause personal injury or death. Read and follow the starting procedure in the Operation and Maintenance Manual.