2603002 VALVE GP-RELIEF Caterpillar parts
2470C, 2570C, 262D, 2670C, 272D, 272D XHP, 277D, 279D, 299D, 299D XHP, 414E, 416E, 422E, 428E, 450E, 450F, 525D, 535D, 545D, 553C, 555D, 563C, 573C, 924K, 930K
Rating:
Alternative (cross code) number:
CA2603002
260-3002
2603002
CA2603002
260-3002
2603002
Weight: 0.08 pounds 0 kg.
BACKHOE LOADER, WHEEL SKIDDER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
BikeMaster Precision Wire Brush
BikeMaster This handy, little stainless steel wire brush can polish and clean those hard-to-reach spaces that other brushes cannot || Can be used with a polishing compound and a Dremel . 4" long with a 1/4" brush diameter and 1/8" stem diameter
BikeMaster This handy, little stainless steel wire brush can polish and clean those hard-to-reach spaces that other brushes cannot || Can be used with a polishing compound and a Dremel . 4" long with a 1/4" brush diameter and 1/8" stem diameter
BikeMaster Precision Wire Brush
BikeMaster This handy, little stainless steel wire brush can polish and clean those hard-to-reach spaces that other brushes cannot || Can be used with a polishing compound and a Dremel . 4" long with a 1/4" brush diameter and 1/8" stem diameter
BikeMaster This handy, little stainless steel wire brush can polish and clean those hard-to-reach spaces that other brushes cannot || Can be used with a polishing compound and a Dremel . 4" long with a 1/4" brush diameter and 1/8" stem diameter
BikeMaster Precision Wire Brush
BikeMaster This handy, little stainless steel wire brush can polish and clean those hard-to-reach spaces that other brushes cannot || Can be used with a polishing compound and a Dremel . 4" long with a 1/4" brush diameter and 1/8" stem diameter
BikeMaster This handy, little stainless steel wire brush can polish and clean those hard-to-reach spaces that other brushes cannot || Can be used with a polishing compound and a Dremel . 4" long with a 1/4" brush diameter and 1/8" stem diameter
Number on catalog scheme:
1
For full view, you need register
Compatible equipment models: 2603002:
Information:
Start By:
Remove the unit injector hydraulic pump. Refer to Disassembly and Assembly, "Unit Injector Hydraulic Pump - Remove".
Remove the injection actuation pressure control valve. Refer to Disassembly and Assembly, "Injection Actuation Pressure Control Valve - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Do not allow dirt to enter the fuel system. Thoroughly clean the area around a fuel system component that will be disconnected. Fit a suitable cover over disconnected fuel system component.
Illustration 1 g01094410
Remove pressure compensator valve (1).
Remove manifold (2).
Remove bolts (4) from valve block (3).
Illustration 2 g01094416
Remove valve block (3), control piston (6), and gasket (5).
Illustration 3 g01094422
Remove rotating group (7). Minor twisting of the rotating group may be necessary in order to remove the rotating group.
Illustration 4 g01094430
Install Tooling (A) in the pump group. Use a suitable press in order to remove shaft (8) from the front bearing.
Illustration 5 g01094431
Remove bolts (9). Remove covers (10).
Illustration 6 g01094441
Remove O-ring seal (12) from pintle bearing (14) that is opposite of spring seat (11). Install Tooling (B) into the pintle bearing finger tight.
Remove plug (13), if necessary.
Tighten Tooling (B) into the pintle bearing until the pintle bearing is removed.
Illustration 7 g01094444
In order to remove the pintle bearing from the other side of the pump group, you need to hold yoke (15) firmly. Use Tooling (B) to remove the pintle bearing.
Remove yoke (15).
Illustration 8 g01094447
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Remove spring seat (11) and the spring.
Illustration 9 g01094449
Use Tooling (D) to remove retaining ring (17). Remove bearing (16).
Illustration 10 g01094450
Use Tooling (D) to remove retaining ring (19). Remove shaft seal (18).
Illustration 11 g01094452
Use Tooling (C) and a suitable press in order to remove bearing (20).
Illustration 12 g01094458
Remove plugs (21) and plug (22) from valve block (3).
Remove the unit injector hydraulic pump. Refer to Disassembly and Assembly, "Unit Injector Hydraulic Pump - Remove".
Remove the injection actuation pressure control valve. Refer to Disassembly and Assembly, "Injection Actuation Pressure Control Valve - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Do not allow dirt to enter the fuel system. Thoroughly clean the area around a fuel system component that will be disconnected. Fit a suitable cover over disconnected fuel system component.
Illustration 1 g01094410
Remove pressure compensator valve (1).
Remove manifold (2).
Remove bolts (4) from valve block (3).
Illustration 2 g01094416
Remove valve block (3), control piston (6), and gasket (5).
Illustration 3 g01094422
Remove rotating group (7). Minor twisting of the rotating group may be necessary in order to remove the rotating group.
Illustration 4 g01094430
Install Tooling (A) in the pump group. Use a suitable press in order to remove shaft (8) from the front bearing.
Illustration 5 g01094431
Remove bolts (9). Remove covers (10).
Illustration 6 g01094441
Remove O-ring seal (12) from pintle bearing (14) that is opposite of spring seat (11). Install Tooling (B) into the pintle bearing finger tight.
Remove plug (13), if necessary.
Tighten Tooling (B) into the pintle bearing until the pintle bearing is removed.
Illustration 7 g01094444
In order to remove the pintle bearing from the other side of the pump group, you need to hold yoke (15) firmly. Use Tooling (B) to remove the pintle bearing.
Remove yoke (15).
Illustration 8 g01094447
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Remove spring seat (11) and the spring.
Illustration 9 g01094449
Use Tooling (D) to remove retaining ring (17). Remove bearing (16).
Illustration 10 g01094450
Use Tooling (D) to remove retaining ring (19). Remove shaft seal (18).
Illustration 11 g01094452
Use Tooling (C) and a suitable press in order to remove bearing (20).
Illustration 12 g01094458
Remove plugs (21) and plug (22) from valve block (3).
Cat SIS web machinery list:
Parts valve Caterpillar catalog:
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 236D, 242B, 242B3, 242D, 247, 247B, 247B3, 248, 252B, 252B3, 257B, 257B3, 257D, 259B3, 259D, 267, 267B, 268B, 272C, 287, 297C, 299C, 906H, 9...
3054C, 3054E, 312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP, 315C, 318D2 L, 414E, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 424D, 428D, 428E, 428F, 430D, 430E, 430F, 432D, 432E, 432F, 434E, 434F, 4...
3054C, 3054E, 312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP, 315C, 318D2 L, 414E, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 424D, 428D, 428E, 428F, 430D, 430E, 430F, 432D, 432E, 432F, 434E, 434F, 4...
420E, 430E, 432E, 434E, 442E, 444E, 450E, 450F, TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
1090, 1190, 1190T, 120H, 120H ES, 120H NA, 120K, 120K 2, 1290T, 12H, 12K, 135H, 135H NA, 1390, 140H, 140K, 140K 2, 143H, 14H, 160H, 160K, 163H, 16H, 216B, 216B3, 226B, 226B3, 2290, 232B, 236B, 236B3, ...
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 323D2 L, 420E, 430E, 450E, 525D, 535D, 545D, 553C, 559, 613G, 914G, 924H, 924HZ, 924K, 928H, 928HZ, 930K, 938H, 938K, 950 GC, 953D, 963D, AP-600D, AP-655D, A...
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 323D2 L, 420E, 430E, 450E, 525D, 535D, 545D, 553C, 559, 613G, 914G, 924H, 924HZ, 924K, 928H, 928HZ, 930K, 938H, 938K, 950 GC, 953D, 963D, AP-600D, AP-655D, A...
120M, 12M, 2470C, 311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 315D L, 318D L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D...
1090, 1190, 1190T, 120H, 120K, 120K 2, 1290T, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 1390, 140G, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160K, 160M 2, 160M 3, 160M 3 AWD, 16M, 236D, 242...
140G, 3126, 3126B, 3208, 3412, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 3606, 3608, 3612, 3616, 5130, 5130B, 515, 518, 5230, 5230B, 525, 525B, 525C, 525D, 528, 528B, 530B, 533, 535B...
305.5, 306, 307C, 307D, 308C, 308D, 311C, 311D LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315D L, 316E...
120H, 120H ES, 120H NA, 120M, 120M 2, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 14...
2603005
VALVE GP-RELIEF
414E, 416E, 422E, 428E, 450E, 450F, 584
414E, 416E, 422E, 428E, 450E, 450F, 584
2596758
VALVE GP-RELIEF
414E, 416E, 422E, 428E
414E, 416E, 422E, 428E
2802652
VALVE-BALL
302.7D, 303.5C, 303.5D, 303.5E, 303E CR, 304D CR, 304E, 305E, 307D, 308D, 308E, 308E2 CR, 416E, 416F, 420E, 420F, 430E, 430F
302.7D, 303.5C, 303.5D, 303.5E, 303E CR, 304D CR, 304E, 305E, 307D, 308D, 308E, 308E2 CR, 416E, 416F, 420E, 420F, 430E, 430F
414E, 416E, 422E, 428E
414E, 416E, 416F, 420E, 420F, 422E, 422F, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F
3242578
VALVE GP-SOLENOID
414E, 416E, 416F, 420E, 420F, 422E, 422F, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E
414E, 416E, 416F, 420E, 420F, 422E, 422F, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E
2297356
VALVE AS-RELIEF
236B3, 242B3, 246C, 252B3, 256C, 257B3, 259B3, 262C, 262C2, 272C, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C, 414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E, 444E, 446D, 450E...
236B3, 242B3, 246C, 252B3, 256C, 257B3, 259B3, 262C, 262C2, 272C, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C, 414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E, 444E, 446D, 450E...
2603003
VALVE GP-RELIEF
312D, 315D L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D L, 320D LRR, 320D RR, 320D2, 321D LCR, 323D L, 323D LN, 323D SA, 323D2 L, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325D, 325D FM, 325D FM LL...
312D, 315D L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D L, 320D LRR, 320D RR, 320D2, 321D LCR, 323D L, 323D LN, 323D SA, 323D2 L, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325D, 325D FM, 325D FM LL...
2603007
VALVE GP-RELIEF
324D FM, 324D FM LL, 325D FM, 325D FM LL, 416E, 422E, 428E, 568 FM LL
324D FM, 324D FM LL, 325D FM, 325D FM LL, 416E, 422E, 428E, 568 FM LL
2603006
VALVE GP-RELIEF
2470C, 2570C, 262D, 2670C, 272D, 272D XHP, 277D, 279D, 299D, 299D XHP, 416E, 422E, 428E, 450E, 450F, 553C, 563C, 573C
2470C, 2570C, 262D, 2670C, 272D, 272D XHP, 277D, 279D, 299D, 299D XHP, 416E, 422E, 428E, 450E, 450F, 553C, 563C, 573C
1705076
VALVE GP-PILOT RELIEF
416E, 422E, 428E, D3G, D4G, D5G, HH45, HH55, HH65, HH75
416E, 422E, 428E, D3G, D4G, D5G, HH45, HH55, HH65, HH75
2603004
VALVE GP-RELIEF
16M, 2470C, 2570C, 2670C, 2864C, 414E, 416E, 422E, 428E, 450E, 450F, 553C, 563C, 573C, 586C, SC-57, SH-56B
16M, 2470C, 2570C, 2670C, 2864C, 414E, 416E, 422E, 428E, 450E, 450F, 553C, 563C, 573C, 586C, SC-57, SH-56B