2609166 VALVE AS-SHUTOFF Caterpillar parts
793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 797, 797B, 797F
Rating:
Alternative (cross code) number:
CA2609166
260-9166
2609166
CA2609166
260-9166
2609166
TRUCK,
Compatible equipment models: 2609166:
Number on catalog scheme:
6
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the V-belts. Refer to Disassembly and Assembly, "V-Belts - Remove and Install" for the correct procedure.
Illustration 1 g02701537
Remove locking nuts (1).
Remove fan (2). Note: Note the orientation of the fan.
Remove fan adapter (3).
Remove fan pulley (4).
If necessary, remove studs (5) from fan drive (6). Installation Procedure
Ensure that all the components are free from wear and damage. If necessary, replace any components that are worn or damaged.
Illustration 2 g02701537
If necessary, install studs (5) to fan drive (6). Tighten studs (5) to a torque of 11 N m (97 lb in).
If studs (5) have not been previously removed from fan drive (6). It will be necessary to check for the correct installation of the studs to the fan drive. Tighten studs (5) to a torque of 11 N m (97 lb in).
Install fan pulley (4).
Install fan adapter (3).
Install fan (2). Note: Ensure that the fan is correctly oriented.
Inspect the condition of locking nuts (1). If necessary, replace the locking nuts. Install locking nuts (1). Tighten locking nuts (1) to a torque of 22 N m (195 lb in). End By:
Install the V-Belts. Refer to Disassembly and Assembly, "V-Belts - Remove and Install" for the correct procedure.
Start By:
Remove the V-belts. Refer to Disassembly and Assembly, "V-Belts - Remove and Install" for the correct procedure.
Illustration 1 g02701537
Remove locking nuts (1).
Remove fan (2). Note: Note the orientation of the fan.
Remove fan adapter (3).
Remove fan pulley (4).
If necessary, remove studs (5) from fan drive (6). Installation Procedure
Ensure that all the components are free from wear and damage. If necessary, replace any components that are worn or damaged.
Illustration 2 g02701537
If necessary, install studs (5) to fan drive (6). Tighten studs (5) to a torque of 11 N m (97 lb in).
If studs (5) have not been previously removed from fan drive (6). It will be necessary to check for the correct installation of the studs to the fan drive. Tighten studs (5) to a torque of 11 N m (97 lb in).
Install fan pulley (4).
Install fan adapter (3).
Install fan (2). Note: Ensure that the fan is correctly oriented.
Inspect the condition of locking nuts (1). If necessary, replace the locking nuts. Install locking nuts (1). Tighten locking nuts (1) to a torque of 22 N m (195 lb in). End By:
Install the V-Belts. Refer to Disassembly and Assembly, "V-Belts - Remove and Install" for the correct procedure.
Caterpillar parts catalog:
Parts valve Caterpillar catalog:
2159101
VALVE GP-FLOW CONTROL
730, 730C, 740, 740B
730, 730C, 740, 740B
2089093
VALVE GP-CONTROL
735, 740
735, 740
1875092
VALVE GP-MANUAL
735, 740
735, 740
735, 740
2015925
VALVE GP-RELIEF
735, 740
735, 740
2015923
VALVE-CHECK
735, 740
735, 740
2174184
VALVE AS-CONTROL
793F, 793F CMD, 793F OEM, 795F AC, 797, 797B, 797F
793F, 793F CMD, 793F OEM, 795F AC, 797, 797B, 797F
4270253
VALVE-CHECK
797, 797B
797, 797B
4270254
VALVE GP-CHECK
797, 797B
797, 797B
3433159
VALVE AS-FUEL
797, 797B, 797F
797, 797B, 797F
2501486
VALVE-SHUTOFF
793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 797, 797B, 797F
793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 797, 797B, 797F