VALVE GP-LOAD CONTROL 2627080 - Caterpillar

Illustration 20 g03192595
994 VIMS Interface Module No. 2
Illustration 21 g03192596
994D VIMS Main Module
Illustration 22 g03192597
994D VIMS Interface Module No. 1
Illustration 23 g03192598
994D VIMS Interface Module No. 2
Illustration 24 g03192599
VIMS 9.0X or Later Class of Onboard Software Update Worksheet
This worksheet should be completed prior to uploading of any new VIMS on board software. This worksheet will help prevent the loss of stored on board data. This worksheet will also help prevent the loss of user settings in the configuration.Note: The service program codes (SPC) can be used to access the information that is required to complete this work sheet. Refer to the Systems Operation, "Service Operation" section of this manual for more information on the service program codes. 1. Service Meter Hour (SMH) : ____________________2. Onboard Clock Time: ____________________ 3. Document All Resettable Totals. (SPC:TOT): ________________________________________________________________________________4. Enter the present machine statistics (SPC:MSTAT):Source Software: ____________________ Configuration Software: ____________________ Hardware Version: ____________________Model Number: ____________________ Serial Number: ____________________ Equipment Number: ____________________ Attachment Code: ____________________ Language: ____________________ Configuration Type: ____________________ Operator ID: ____________________ 5. Unit Setting (SPC: UN): English/Metric (circle one) 6. Download all on board data files.7. Auto Lube Cycle Time (SPC: LUBSET): ____________________7a. Auto Lube Duration (SPC: LUBSET): ____________________8. Backlight Setting (SPC: BLT): ____________________ 9. Contrast Setting (SPC: CON): ____________________10. Service Light Setting(9.5X or later) (SPC: SVCSET): ____________________ 11. Snapshot Configure Setting(9.5X or later): (SPC: ERSET): ____________________ 12. Event Configure Setting(9.6X or later): (SPC: ESET): Use table 1 to record the Event Configure Settings.
Table 1
Event     Log (1)     Display (1)     Telemetry (1)     Service Light (1)    
1.                    
2.                    
3.                    
4.                    
6.                    
7.                    
8.                    
9.                    
10.                    
11.                    
12.                    
13                    
14                    
15                    
( 1 ) Indicate (E)nabled or (D)isabled.13. Max Payload Weight (SPC: PAYCONF): ____________________13a. Last Pass Indicator (PAYCONF): ____________________Note: Customizing the new large wheel loader VIMS configuration software to the same settings as the presently installed software with the Information System Builder software is mandatory prior to putting the machine back into service. Refer to , RENR2517, "Large Wheel Loader VIMS Payload Users Manual" for instructions on how to update the new configuration.Note: It is highly recommended that the user have a copy of the present VIMS source software and VIMS configuration software available before the uploading