VALVE GP-CONTROL 2691066 - Caterpillar

Illustration 6 g02142485
Tactical monitor. Typical example. (11) Tactical monitor (12) Machine
Illustration 7 g02142487
Strategic monitor. Typical example. (13) Strategic monitor (14) Machine status indicator
Illustration 8 g02142534
"MAS Joystick menu" window (15) Joystick error
Select "Start" (10) when active.
Select machine (12) from Tactical monitor (11) .Expected Result:MAS program windows appear: Tactical monitor (11), front and rear video images, joystick menu and Strategic monitor (13). Machine status indicator (14) is displayed on Strategic monitor (11) indicating the presence of a machine. Machine status indicator (14) turns yellow when the machine is selected.Results:
YES - MAS program windows appear and machine status indicator turns yellow when the machine is selected. Proceed to Test Step 6.
NO - MAS program windows do not appear. "5060 Joystick failed calibration" is displayed.Repair: Follow the Joystick calibration procedure:
Illustration 9 g02142974
"MAS Login" dialog box (4) (16) "Stop" button
Center the joysticks.
Ensure that no joystick buttons are damaged or pressed.
Select "STOP" button (16) on "MAS Login" dialog box (4) .
Repeat Test Step 4.STOP
NO - Error codes displayed in the "MAS Joystick menu" window.Repair: Refer to Troubleshooting, Testing, and Adjusting, "Diagnostic Code List" in this manual.STOP
NO - No machine is visible.Repair: Refer to Local Area Radio Network, Troubleshooting, Testing, and Adjusting, "Local Area Radio Network - Test" and Machine Automation System, Troubleshooting, Testing, and Adjusting for MAS diagnostics procedures.STOPTest Step 6. Sponsor the Machine.
Sponsor the machine.ReferenceFor information on sponsoring a machine, refer to Operation and Maintenance Manual, SEBU8318, "Preparing for Operation".
Illustration 10 g02142513
Typical example (17) "STOP" mode (18) Notification log (19) "STOP"
Select "STOP" (19) on Tactical monitor (11) .Expected Result:Machine status indicator (14) turns green."STOP" mode (17) appears on Tactical monitor (11) .Results:
YES - Machine status indicator turns green. "STOP" mode appears on Tactical monitor. Proceed to Test Step 7.
NO - Error codes are displayed in the notification log.Repair: Refer to Troubleshooting, Testing, and Adjusting, "Diagnostic Code List" in this manual.STOP
NO - Unable to sponsor the machine.Repair: Refer to Local Area Radio Network, Troubleshooting, Testing, and Adjusting, "Local Area Radio Network - Test" and Machine Automation System, Troubleshooting, Testing, and Adjusting, KENR9081 for MAS diagnostics procedures.STOPTest Step 7. Locate the Machine
Locate the machine on the map.ReferenceFor more information on locating a machine, refer to Operation and Maintenance Manual, SEBU8318, "Preparing for Operation"Expected Result:The machine icon appears at the selected location, LADAR data is displayed in Strategic monitor 13, and () Tactical monitor (11). The "2010 No Sponsor" code is not active.Results:
YES - The machine icon appears at the selected location, and data is displayed in the Strategic monitor and the Tactical monitor. The "2010 No Sponsor" code is not active. Proceed to Test Step 8.
NO - Error codes are displayed in the notification log.Repair: Refer to Troubleshooting, Testing, and Adjusting, "Diagnostic Code List" in this manual.STOP
NO - The machine will not locate in the correct position.Repair: Rebuild the map. Refer to the Troubleshooting, Testing, and Adjusting, "Operations Area Map - Configure" in this manual.Contact either IT support or your Caterpillar dealer.STOPTest Step 8. Start the Machine.
Illustration 11 g02142553
(18) Notification log (20) "STANDBY" mode (21) "STANDBY" (22) "Start"
Select "STANDBY" (21). "STANDBY"