2701647 VALVE GP-MAIN CONTROL Caterpillar parts
990H
Rating:
Alternative (cross code) number:
CA2701647
270-1647
2701647
CA2701647
270-1647
2701647
Weight: 540 pounds 244 kg.
WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$20.55
07 Apr 2021
9.0[4.05] Pounds
-: -
Ridgid/Ryobi Replacement Part 2701647 SWITCH ASSEMBLY, VARIABLE/9
Ryobi Part # 2701647 || switch assembly, variable/9.6v || Always Check Owners manual For Proper Part number
Ryobi Part # 2701647 || switch assembly, variable/9.6v || Always Check Owners manual For Proper Part number
Number on catalog scheme:
9
For full view, you need register
Compatible equipment models: 2701647:
Information:
Engine Oil
Change the Oil
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin.
1. The crankcase oil drain plug is located under the rear of the machine.2. Remove the bolts, washers and engine crankcase access cover from under the upper structure. 3. Unlatch and raise the engine hood. 4. Remove the crankcase oil drain plug. Allow the oil to drain into a container.5. Install the drain plug after all of the oil has drained. 6. Remove the oil fill plug. Fill the crankcase with oil. See "Refill Capacities". Clean and install the plug. 7. Start and operate the engine to fill the filter. Stop the engine.8. Maintain the oil level between the marks on the dipstick.9. Close and latch the engine hood.10. Install engine crankcase access cover.Engine Oil Breather
Clean the Breather
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin.
1. Unlatch and raise the engine hood. 2. Loosen the clamp and disconnect the outlet hose from the breather. 3. Remove the breather.4. Wash the breather in clean nonflammable solvent. Shake it to remove excess solvent. Allow it to dry. 5. Inspect the O-ring. Use a new O-ring if it is damaged.6. Install the breather.7. Connect the outlet hose.8. Close and latch the engine hood.Cooling System
Add Conditioner
At operating temperature, the engine coolant is hot and under pressure.Steam can cause personal injury.Check the coolant level only after the engine has been stopped and the fill cap is cool enough to touch with your bare hand.Remove the fill cap slowly to relieve pressure.Cooling system conditioner contains alkali. Avoid contact with the skin and eyes to prevent personal injury.
Do not add conditioner monthly unless the engine has actually operated 250 service hours. Adding conditioner before 250 service hours will result in an excessive concentration of conditioner.Do not use Caterpillar coolant conditioner elements with Dowtherm 209 Full-Fill coolant. Follow recommendations provided with Dowtherm 209 Full-Fill coolant.
1. Unlatch and raise the engine hood. 2. Remove the radiator cap slowly to relieve pressure.3. Add 0.24 liter (0.06 gal) of Caterpillar cooling system conditioner, to provide a 3% to 6% concentration in the coolant.4. Replace the cap if the gasket is damaged. Install the radiator cap.5. Close and latch engine hood.Final Drive
Check the Oil Level
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin.
1. Position one final drive with the oil drain plug (1) at the bottom.2. Remove oil level plug (2). 3. Oil should be to the bottom of the oil level plug opening.4. Add oil through the opening of the oil fill plug, if necessary. 5. Clean the plugs in nonflammable solution. Apply pipe sealant to plugs. 6. Install plug (2).7. Repeat procedure on the other final drive.Swing Drive
Check the Oil Level
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin.
1. The swing drive oil dipstick is located to the rear of the
Change the Oil
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin.
1. The crankcase oil drain plug is located under the rear of the machine.2. Remove the bolts, washers and engine crankcase access cover from under the upper structure. 3. Unlatch and raise the engine hood. 4. Remove the crankcase oil drain plug. Allow the oil to drain into a container.5. Install the drain plug after all of the oil has drained. 6. Remove the oil fill plug. Fill the crankcase with oil. See "Refill Capacities". Clean and install the plug. 7. Start and operate the engine to fill the filter. Stop the engine.8. Maintain the oil level between the marks on the dipstick.9. Close and latch the engine hood.10. Install engine crankcase access cover.Engine Oil Breather
Clean the Breather
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin.
1. Unlatch and raise the engine hood. 2. Loosen the clamp and disconnect the outlet hose from the breather. 3. Remove the breather.4. Wash the breather in clean nonflammable solvent. Shake it to remove excess solvent. Allow it to dry. 5. Inspect the O-ring. Use a new O-ring if it is damaged.6. Install the breather.7. Connect the outlet hose.8. Close and latch the engine hood.Cooling System
Add Conditioner
At operating temperature, the engine coolant is hot and under pressure.Steam can cause personal injury.Check the coolant level only after the engine has been stopped and the fill cap is cool enough to touch with your bare hand.Remove the fill cap slowly to relieve pressure.Cooling system conditioner contains alkali. Avoid contact with the skin and eyes to prevent personal injury.
Do not add conditioner monthly unless the engine has actually operated 250 service hours. Adding conditioner before 250 service hours will result in an excessive concentration of conditioner.Do not use Caterpillar coolant conditioner elements with Dowtherm 209 Full-Fill coolant. Follow recommendations provided with Dowtherm 209 Full-Fill coolant.
1. Unlatch and raise the engine hood. 2. Remove the radiator cap slowly to relieve pressure.3. Add 0.24 liter (0.06 gal) of Caterpillar cooling system conditioner, to provide a 3% to 6% concentration in the coolant.4. Replace the cap if the gasket is damaged. Install the radiator cap.5. Close and latch engine hood.Final Drive
Check the Oil Level
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin.
1. Position one final drive with the oil drain plug (1) at the bottom.2. Remove oil level plug (2). 3. Oil should be to the bottom of the oil level plug opening.4. Add oil through the opening of the oil fill plug, if necessary. 5. Clean the plugs in nonflammable solution. Apply pipe sealant to plugs. 6. Install plug (2).7. Repeat procedure on the other final drive.Swing Drive
Check the Oil Level
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin.
1. The swing drive oil dipstick is located to the rear of the
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts valve Caterpillar catalog:
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 160K, ...
24H, 814F, 815F, 816F, 844, 844H, 844K, 854G, 854K, 980G II, 990 II, 990H, 990K, 992G, 992K, 993K, 994, 994D, 994F, 994H, D11R, D11T, R2900, R2900G, R3000H
844H, 938G II, 938H, 950G II, 950H, 962G II, 962H, 966H, 972H, 980K, 980K HLG, 980M, 982M, 990H, IT38G II, IT38H, IT62G II, IT62H
24H, 5110B, 5130, 5130B, 5230, 5230B, 651E, 69D, 773D, 773E, 775E, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789B, 789C, 789D, 793B, 793C, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 797...
1090, 1190, 1190T, 120G, 120H, 120H ES, 120H NA, 120M, 1290T, 12G, 12H ES, 12H NA, 12M, 130G, 135H, 135H NA, 1390, 140G, 140H ES, 140H NA, 143H, 14H, 14H NA, 160H ES, 160H NA, 163H NA, 16G, 16H NA, 16...
1090, 1190, 1190T, 120K, 120K 2, 120M, 120M 2, 1290T, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 1390, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 214B, 2...
24M, 3406E, 3456, 365C, 365C L, 365C L MH, 374D L, 374F L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 583T, 587T, 621B, 621G, 623G, 627F, 627G, 631D, 631E, 631G, 633E II, 637D, 637E...
24M, 3406E, 3456, 365C, 365C L, 365C L MH, 374D L, 374F L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B, 583T, 587T, 621B, 621G, 623G, 627F, 627G, 631D, 631E, 631G, 633E II, 637...
24M, 3406E, 3456, 365C, 365C L, 365C L MH, 385B, 385C, 385C FS, 385C L, 385C L MH, 5090B, 583T, 587T, 621G, 623G, 627F, 627G, 631D, 631G, 637G, 651B, 657B, 657E, 657G, 735, 740, 770, 772, 773F, 773G, ...
1090, 1190, 1190T, 120H, 120H ES, 120H NA, 120K, 120K 2, 1290T, 12H, 12K, 135H, 135H NA, 1390, 140H, 140K, 140K 2, 143H, 14H, 160H, 160K, 163H, 16H, 216B, 216B3, 226B, 226B3, 2290, 232B, 236B, 236B3, ...
1090, 1190, 1190T, 120H, 120K, 120K 2, 1290T, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 1390, 140G, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160K, 160M 2, 160M 3, 160M 3 AWD, 16M, 236D, 242...
785C, 785D, 789C, 789D, 793B, 793C, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 844, 844H, 854G, 854K, 990 II, 990H, 992C, 992D, 992G, 992K, 993K, 994, 994D, 994F, 994H
3014605
VALVE GP-STEERING
990H, 990K
990H, 990K
2549079
VALVE GP-ETHER STARTING
844H, 990H
844H, 990H
1927430
VALVE GP-RADIATOR DRAIN
824C, 824H, 825H, 826H, 844H, 990H
824C, 824H, 825H, 826H, 844H, 990H
2646867
VALVE GP-COOLER BYPASS
994F, 994H
994F, 994H
994F, 994H