VALVE GP-CONTROL 2801275 - Caterpillar

Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
The hydraulic lines mounted on the boom may move on the machines that are listed above. The movement occurs during operation of work tools such as the hammer or ripper. The movement may accelerate the wear of the grommets.
Illustration 1 g03337477
Hydraulic LinesSolution
Illustration 2 g03337478
Interim SolutionIf your machine has problems with grommet wear due to movement of the hydraulic lines mounted on the boom, contact your Cat Technical Communicator so that a Service Request can be submitted to the Dealer Solution Network (DSN) and to obtain 368-9404 Special Kit as an interim solution.