AVSPARE.COM
parts catalog

VALVE-FOOT 2809629 - Caterpillar



2809629 VALVE-FOOT Caterpillar parts VALVE
Rating:
26
Alternative (cross code) number:
CA2809629
280-9629
2809629
Caterpillar 2809629 VALVE-FOOT

Buy VALVE-FOOT 2809629 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


The information supplied in this service letter may not be valid after the termination date of this program.Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
TERMINATION DATE
30Sep2015
PROBLEM
Due to an issue with the torque tool that tightens the bolts connecting the swing bearing to the upper frame, the bolts were not tightened to the correct tightening specification on certain 336E Excavators.
AFFECTED PRODUCT
Model Identification Number
336E L FJH00496-00505, 509-537
JRJ00251-00263
PARTS NEEDED
Qty
Part Number Description
42 8T0671 BOLT-HEX HEAD (After Failure Only)
42 0930020 SPACER (After Failure Only)
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 7% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
Static torque check the bolts from the swing bearing to the upper frame. The correct tightening specification for the bolts is 900 +/- 100 N.m (665 +/- 75 lb ft).
If any of the bolts are found loose, remove the loose bolt, clean the threads on the bolt and the internal threads on the machine. Inspect the threads for any damage. If the threads are damaged, repair the threads or replace the bolt. Apply Loctite 243 on the bolt threads and reinstall the bolt. Tighten the bolt to a specified torque of 900 +/- 100 N.m (665 +/- 75 lb ft).
Image1
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-2000 hrs,
0-12 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 4.0-hour job
4.0 hours is allowed for inspection and, if required, replacement of the bolts.
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.


Parts valve Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.