VALVE GP-SELECTOR & PRESS CONT 2813154 - Caterpillar

Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Inspect all O-rings, seals, and gaskets for wear and damage. Replace if necessary.
Table 1
Required Tools
Tool Part Number Part Description Qty.
A - Rubber Lubricant -
B - Krytox ® LS23 or Krytox®GPL 205 - Note: Repeat procedure on both water pumps.
Illustration 1 g06233059
Left side view.
Use Tooling (A) to lubricate O-rings.
Use Tooling (B) to secure O-rings during assembly.
Position water pump and install five nuts (10).
Connect oil line (11) and install four bolts (9).
Illustration 2 g06232600
Connect harness (8).
Illustration 3 g06232573
Use Tooling (A) to lubricate the O-ring and position cover/tube assembly (7).
Install two bolts (6) and stud (5).
Illustration 4 g06232564
Install two bolts (4).
Illustration 5 g06232549
Position guard (3) and install four bolts (1).
Connect wire (2).
Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".