2862221 VALVE-COUNTERBALANCE Caterpillar parts
RM-300, RM-500
Rating:
Alternative (cross code) number:
CA2862221
286-2221
2862221
CA2862221
286-2221
2862221
Weight: 0.40 pounds 0 kg.
RECLAIMER MIXER,
Number on catalog scheme:
11
For full view, you need register
Information:
Note: Put identification marks on all lines for installation purposes. Plug all hose assemblies. This will help to prevent fluid loss and this helps to keep contaminants from entering the system.
Lower the blade to the ground.
Illustration 1 g00863119
Position the upper structure.
Illustration 2 g00863237
Remove two bolts (1) and washers.
Remove cover (2) from the blade cylinder.
Illustration 3 g00863341
Attach a suitable lifting device to the front of the blade cylinder.
Illustration 4 g00863346
Remove bolt (3), washer (4), and pin assembly (5) from the blade cylinder. Lower the cylinder to the ground.
Illustration 5 g00984439
Attach a suitable lifting device to the blade.
Illustration 6 g00863373
Illustration 7 g00863377
Support the rear portion of the blade.
Remove bolt (6), washer (7), and pin assembly (8) from the blade.
Repeat Steps 8 through 9 on the other side of the blade.
Remove the blade from the machine. The weight of the blade is approximately 168 kg (370 lb).Installation Procedure
Note: Be sure that the pin assembly and the pin bores are thoroughly clean prior to installation of the blade cylinder.
Illustration 8 g00984439
Install the blade in position. The weight of the blade is approximately 168 kg (370 lb).
Place the rear portion of the blade in position. Support the rear portion of the blade.
Illustration 9 g00863373
Illustration 10 g00863377
Install pin assembly (8), washer (7), and bolt (6) .
Apply a thin coat of Tooling (A) on the diameter of the pin bore and the pin assembly. Use the suitable lifting device to move the blade cylinder into position.
Repeat Steps 2 through 4 on the other side of the blade.
Illustration 11 g00863341
Attach a suitable lifting device to the blade cylinder.
Illustration 12 g00863346
Install pin assembly (5), washer (4), and bolt (3) .
Apply a thin coat ofTooling (A) on the diameter of the pin bore and the pin assembly. Use the suitable lifting device to move the blade cylinder into position.
Illustration 13 g00863237
Install cover (2). Secure cover (2) with two bolts (1) .
Lower the blade to the ground.
Illustration 1 g00863119
Position the upper structure.
Illustration 2 g00863237
Remove two bolts (1) and washers.
Remove cover (2) from the blade cylinder.
Illustration 3 g00863341
Attach a suitable lifting device to the front of the blade cylinder.
Illustration 4 g00863346
Remove bolt (3), washer (4), and pin assembly (5) from the blade cylinder. Lower the cylinder to the ground.
Illustration 5 g00984439
Attach a suitable lifting device to the blade.
Illustration 6 g00863373
Illustration 7 g00863377
Support the rear portion of the blade.
Remove bolt (6), washer (7), and pin assembly (8) from the blade.
Repeat Steps 8 through 9 on the other side of the blade.
Remove the blade from the machine. The weight of the blade is approximately 168 kg (370 lb).Installation Procedure
Note: Be sure that the pin assembly and the pin bores are thoroughly clean prior to installation of the blade cylinder.
Illustration 8 g00984439
Install the blade in position. The weight of the blade is approximately 168 kg (370 lb).
Place the rear portion of the blade in position. Support the rear portion of the blade.
Illustration 9 g00863373
Illustration 10 g00863377
Install pin assembly (8), washer (7), and bolt (6) .
Apply a thin coat of Tooling (A) on the diameter of the pin bore and the pin assembly. Use the suitable lifting device to move the blade cylinder into position.
Repeat Steps 2 through 4 on the other side of the blade.
Illustration 11 g00863341
Attach a suitable lifting device to the blade cylinder.
Illustration 12 g00863346
Install pin assembly (5), washer (4), and bolt (3) .
Apply a thin coat ofTooling (A) on the diameter of the pin bore and the pin assembly. Use the suitable lifting device to move the blade cylinder into position.
Illustration 13 g00863237
Install cover (2). Secure cover (2) with two bolts (1) .
Caterpillar parts catalog:
Parts valve Caterpillar catalog:
1090, 1190, 1190T, 120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 1290T, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 1390, 140B, 140G, 140H, 140H ES, 1...
1090, 1190, 1190T, 120G, 120H, 120H ES, 120H NA, 120M, 1290T, 12G, 12H ES, 12H NA, 12M, 130G, 135H, 135H NA, 1390, 140G, 140H ES, 140H NA, 143H, 14H, 14H NA, 160H ES, 160H NA, 163H NA, 16G, 16H NA, 16...
1090, 1190, 1190T, 120K, 120K 2, 120M, 120M 2, 1290T, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 1390, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 214B, 2...
24M, 3406E, 3456, 365C, 365C L, 365C L MH, 374D L, 374F L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 583T, 587T, 621B, 621G, 623G, 627F, 627G, 631D, 631E, 631G, 633E II, 637D, 637E...
24M, 3406E, 3456, 365C, 365C L, 365C L MH, 374D L, 374F L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B, 583T, 587T, 621B, 621G, 623G, 627F, 627G, 631D, 631E, 631G, 633E II, 637...
24M, 3406E, 3456, 365C, 365C L, 365C L MH, 385B, 385C, 385C FS, 385C L, 385C L MH, 5090B, 583T, 587T, 621G, 623G, 627F, 627G, 631D, 631G, 637G, 651B, 657B, 657E, 657G, 735, 740, 770, 772, 773F, 773G, ...
1090, 1190, 1190T, 120H, 120H ES, 120H NA, 120K, 120K 2, 1290T, 12H, 12K, 135H, 135H NA, 1390, 140H, 140K, 140K 2, 143H, 14H, 160H, 160K, 163H, 16H, 216B, 216B3, 226B, 226B3, 2290, 232B, 236B, 236B3, ...
1090, 1190, 1190T, 120H, 120K, 120K 2, 1290T, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 1390, 140G, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160K, 160M 2, 160M 3, 160M 3 AWD, 16M, 236D, 242...
3126E, 3208, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130, 5130B, 5230, 5230B, 613C, 933, 933C, 938G, 939, 939C, 950F, 950F II, 950G, 953C, 960F, 962G, AP-200B, AP-800C, AP-800D, B...
14M, 16M, 345C, 345C L, 345C MH, 345D, 345D L, 349D L, 725, 730, 966H, 972H, C11, C13, C13 XQ350, CX31-C13I, D8N, R1700G, RM-300, TH35-C13I, W345C MH
14M, 16M, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 725, 730, 966H, 972H, 980C, C11, C13, C13 XQ350, CX31-C13I, D8N, R1600H, R1700G, RM-300, TH35-C11I, TH35-C13I, W345C MH
14M, 16M, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 621H, 621K, 623H, 623K, 623K LRC, 627H, 627K, 627K LRC, 725, 730, 730C, 966H, 972H,...
2573254
VALVE-DIFFERENTIAL
RM-300, RM-500
RM-300, RM-500
2573247
VALVE-DIFFERENTIAL
RM-300, RM-500
RM-300, RM-500
2573245
VALVE GP-SOLENOID
RM-300, RM-500
RM-300, RM-500
2573255
VALVE-CHECK
RM-300, RM-500
RM-300, RM-500
2573252
VALVE GP-SOLENOID
RM-300, RM-500
RM-300, RM-500
3731997
VALVE GP-SOLENOID
RM-300, RM-500
RM-300, RM-500
3731996
VALVE GP-SOLENOID
RM-300, RM-500
RM-300, RM-500
2556413
VALVE GP-PRESSURE
RM-500
RM-500
2556409
VALVE AS-CHECK
AP-1055D, AP-600D, AP-655D, AP1000E, BG-260D, BG1000E, BG500E, BG600D, BG655D, RM-500
AP-1055D, AP-600D, AP-655D, AP1000E, BG-260D, BG1000E, BG500E, BG600D, BG655D, RM-500
2556411
VALVE GP-RELIEF
RM-500
RM-500