VALVE GP-DIVERTER 2909591 - Caterpillar

Illustration 10 g01837355
Install bearing (28). Install ring (29).
Illustration 11 g01837356
Install hub assembly (27). Install bolts (26).
Illustration 12 g01837357
Install shaft (25). Install spacer (25A). Use Tooling (B) in order to install retaining ring (24).
Illustration 13 g01837358
Install cover (23). Install retaining ring (22).
Illustration 14 g01704648
Install impeller (20) onto housing (21).
Illustration 15 g01837373
Install bolts (19).
Illustration 16 g01704673
Install gears (17). Note: Support gears with suitable cribbing in order to install bearings on gear shafts.
Illustration 17 g01837393
Use Tooling (E) and a suitable press in order to install bearings (18). Note: Remove suitable cribbing from gears.
Illustration 18 g01837394
Install retaining rings (16). Use Tooling (C) in order to install retaining rings (14).
Illustration 19 g01837395
Use Tooling (D) in order to install retaining ring (14). Use Tooling (C) in order to install retaining ring (15).
Illustration 20 g01704733
Install housing (11) onto torque converter (13).
Illustration 21 g01837396
Attach Tooling (A) and a suitable lifting device in order to install housing (11). Install bolts (12). The weight of the housing is approximately 91 kg (200 lb).
Illustration 22 g01837453
Install plug assembly (10). Install plate (9).
Illustration 23 g01837454
Install temperature sensor (8).
Illustration 24 g01837473
Install relief valve (4) and bolts (3). Install yoke (1) and bolt (2). Install speed sensor (5). Install plate (5B) and bolts (5A). Install bracket (7 ) and bolt (6). End By:
Install the vane pump (elevator). Refer to Disassembly and Assembly, "Vane Pump (Elevator) - Install".
Install the vane pump (hydraulic and steering). Refer to Disassembly and Assembly, "Vane Pump (Hydraulic and Steering) - Install".