VALVE GP-SOLENOID 2935452 - Caterpillar

Introduction
Do not perform any procedure in this Special Instruction until you have read the information and you understand the information.Safety Section
Do not operate or work on this machine unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals. Failure to follow the instructions or heed the warnings could result in injury or death. Contact your Cat dealer for replacement manuals. Proper care is your responsibility.
Personal injury or death can result from sudden work tool movement.Sudden movement of the work tool can cause injury to persons near the work tool.To prevent injury or death, make sure that the area around the work tool is clear of personnel and obstructions before operating the work tool.
Illustration 1 g00104545Prevent the machine from movement. Park the machine on a level surface.Attach a "Do Not Operate" warning tag or a similar warning tag to the start switch before you service the equipment . These warning tags (Special Instruction, SEHS7332) are available from your Caterpillar dealer.Required Parts
Table 1
Parts List for 511-3151 Front Lines Group Revision -00
Item Qty Pt. No. Part Name
(1) 1 8T-4223 Hard Washer
(2) 1 171-2637 Boss
(3) 1 239-1798 Block
(4) 1 239-9036 Check Valve Gp
(5) 1 330-2346 Hose As
(6) 1 148-8357 Elbow As
(7) 1 1P-3705 Rectangular Seal
(8) 1 5P-7468 Clip
(9) 1 5P-7469 Clip
(10) 1 8T-2525 Grommet
(11) 1 8T-4194 Bolt
Illustration 2 g06068740
511-3151 Front Lines Gp
Installation Procedure
Illustration 3 g06068746
(1) 8T-4223 Hard Washer
(2) 171-2637 Boss
(4) 239-9036 Check Valve Gp
(5) 330-2346 Hose As
(8) 5P-7468 Clip
(9) 5P-7469 Clip
(10) 8T-2525 Grommet
(11) 8T-4194 Bolt
Install hose (5) onto the front side of the main control valve as shown.
Secure hose (5) with hardware as shown.
Illustration 4 g06068754
(3) 329-1798 Guide
(5) 330-2346 Hose As
(6) 148-8357 Elbow As
(7) 1P-3705 Rectangular Seal
Install hose (5) onto the rear side of the main control valve as shown.