AVSPARE.COM
parts catalog

VALVE ASSEM. 2H9114 - Caterpillar



2H9114 VALVE ASSEM. Caterpillar parts D337 VALVE
Rating:
55
Alternative (cross code) number:
CA2H9114
2H-9114
2H9114
Caterpillar 2H9114 VALVE ASSEM.

Buy VALVE ASSEM. 2H9114 Caterpillar genuine, new aftermarket tractor parts with delivery
MARINE ENGINE,

Compatible equipment models: 2H9114:

MARINE ENGINE  D337   Caterpillar
Number on catalog scheme: None
 
  For full view, you need register

Information:

Put lubricant on the lip of all seals. Put 5P960 Grease on all pin bores (lift and tilt cylinders, bucket and frame pin bores).(10) Torque for six bolts ... 270 25 N m (200 18 lb ft)Installation Procedure for Pin Assemblies (9).
The pin assemblies are made up of pins (9), sleeve bearings (20), thrust bearings (25), the seals and seal retainers.1. Clean the bores for all pin assemblies (9) and collets (21).2. Install pin assemblies (9) through lift arm assembly (19) and bucket (27). Make sure that plugs (22) and (26) are toward the top.3. Tighten bolts (10) to a torque of 270 25 N m (200 18 lb ft)4. Remove plugs (22) and (26). Put 5P7504 Pin Lube Oil into the hole where plug (26) was removed. When oil comes out the hole where plug (22) was removed, install plugs (22) and (26).5. Put 5P3931 Anti-Seize Compound on collets (21) and threads of bolts (24).6. Install collets (21), washers (23) and bolts (24).7. Tighten bolts (24) to a torque of 875 100 N m (640 75 lb ft). After the bolts are tight, hit collets (21) with a heavy hammer so the torque for bolts (24) is less than 465 N m (345 lb ft). Tighten bolts (24) again to a torque of 875 N m (640 lb ft). Hit each collet again so the torque for bolts (24) is less than 700 N m (520 lb ft). Tighten bolts (24) to a final torque of 875 100 N m (640 75 lb ft).

Caterpillar parts catalog:

Caterpillar parts catalog
D337 MARINE ENGINE 23B00300-00455


Parts valve Caterpillar catalog:

1L2073 VALVE GP-PRESSURE REDUCING
3406B, 3408, 3408C, 3412, 3412C, 3412D, 3412E, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, C32, D337, D342, D346, D348, D349, D353C, D364, D375D, D379, D379A, D379B, D397D, D398, D398A...
3H3225 VALVE-WHISTLE
D315, D337, D353C, D364, D375D, D397D
8F8858 VALVE
3508, 3508B, 3508C, 3512, 3516, 3516B, 5130, 5230, 594, 776C, 784B, 785, 785B, 789B, 793B, 994, D11N, D11R, D326F, D337, D337F, D353C, D379, D379A, D379B, D398, D398A, D398B, D399, D9E, D9G, D9H, G350...
9B4510 VALVE ASSEM.
12E, 16, 561B, 583H, 621, 651, 666, 824, 955C, 955H, 955K, 977H, 977K, 980, 988, AP-1200, D315, D320A, D337, D342, D342C, D343, D353C, D379, D398, D4D, D8H, D9E, D9G, G342C
3F3825 VALVE ASSEM.
D326F, D337, D364, D397D
3F3828 VALVE ASSEM.
D326F, D337, D364, D397D
2H5834 VALVE (INLET)
D326F, D337, D337F
6H3347 VALVE SERVICE GROUP
583H, D326F, D364, D375D, D397D
2H5834 VALVE (INLET)
D326F, D337, D337F
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.