VALVE GP-MAIN CONTROL 3237680 - Caterpillar

Installation Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00825220
Attach a suitable lifting device (7) to aftercooler (8) .
Position aftercooler (8). The weight of the aftercooler is 40 kg (90 lb). Install two bolts (9) to each side of aftercooler (8) .
Illustration 2 g00825213
Reposition side assembly (6). Install six bolts (5) .
Repeat Step 3 for the other side.
Illustration 3 g00825205
Reposition hose (4). Tighten four hose clamps (3) .
Repeat Step 5 for the other side.
Illustration 4 g00825201
Position cover (2). Install six bolts (1) .
Refill the cooling system. Refer to Operation and Maintenance Manual, "Capacities (Refill)" for information regarding the correct refill capacity.End By:
Install the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".
Install the refrigerant condenser. Refer to Disassembly and Assembly, "Refrigerant Condenser - Remove and Install".