VALVE GP-MAIN CONTROL 3327934 - Caterpillar

Illustration 1 g02996056
Table 1
Specification for 293-4853 Electric Starting Motor Gp
Item Qty Part Specification Description
1 - - Battery terminal:
Maximum number of cable or wire terminals between the nuts should be 3.
A maximum of two cable terminals can be larger than 0 AWG.
Final installation torque for the nut on the battery terminal is 24 2 N m (212 18 lb in).
2 - - Final installation torque for the solenoid mounting nuts is 8.75 1.05 N m (77.44 9.29 lb in).
3 - - Switch terminal:
Connect switch terminal to start relay switch.
No other additional connection is required.
Final installation torque for the nut on the switch terminal is 2.15 0.25 mm (0.08 0.01 inch).
4 - - Final installation torque for the nut on the ground terminal is 24 2 N m (212 18 lb in).
A - - Distance when pinion engaged is 69.9 mm (2.75 inch).
B - - Distance when pinion disengaged is 47.5 2.2 mm (1.87 0.09 inch).
- - - Direction of rotation from the pinion end is Clockwise.
Operation voltage is 24 VDC.
Operating temperature range is −32 to +120° C (−26 to 248° F).
- - - No load performance at 20° C (68° F):
Speed is 4059 470 rpm.
Current is 142 30 amp.
Voltage is 24 VDC.