VALVE AR-SWING 3342307 - Caterpillar

Total assembled length of hose assembly (5) ... 1960 19 mm (77.2 0.7 inch)
Table 30
Specification for 255-1854 Pilot Lines Gp
Item Qty Part Specification Description
1 9 7K-1181 Cable Strap Sharp corners at the cutting edge of each cable strap shall not be allowed.
4 1 437-0481 Hose As Torque to 76 4 N m (56 3 lb ft).
6 1 148-8336 Connector As Torque to 29 3 N m (257 27 lb in). Stick Cylinder Lines Group
Illustration 20 g03805017
239-1876 Stick Cylinder Lines Gp
Before installing 237-3199 Stick Cylinder Lines Gp, remove the parts shown in Illustration 20 and listed in Table 26.
Table 31
Standard Removal Parts
Item Part Number Part Name Qty
L1 239-1877 Tube As 1
L2 1P-3705 Rectangular Seal 1
L3 8T-4648 Bolt 4
L4 453-1259 Bolt 2
L5 451-2175 Hard Washer 2
Illustration 21 g03794833
237-3199 Stick Cylinder Lines Gp
Install 237-3199 Stick Cylinder Lines Gp. Refer to Table 6 for a list of the required parts. Refer to Illustration 21 for the location of the parts. Refer to Illustration 22 and Table 8 for specifications.
Illustration 22 g03795044
Table 32
Specification for 237-3199 Stick Cylinder Lines Gp
Item Qty Part Specification Description
8 1 268-7208 Tube As Torque to 76 4 N m (56 3 lb ft).
20 3 8T-4186 Bolt Torque to 30 7 N m (266 62 lb in).
22 4 8T-4196 Bolt Torque to 32 6 N m (283 53 lb in).
C - - Distance from the center of the mounting pin to the support assembly 1500.0 3.0 mm (59.06 0.12 inch).
D - - Orientation of the support assembly is 20 3 degrees.