3402064 VALVE & MTG GP-HYDRAULIC FAN Caterpillar parts
D11T
Rating:
Alternative (cross code) number:
CA3402064
340-2064
3402064
CA3402064
340-2064
3402064
TRACK-TYPE TRACTOR,
Compare Prices:
As an associate, we earn commssions on qualifying purchases through the links below
Sunsong 3402064 Power Steering Reservoir Hose
Sunsong Return Hoses exceed original equipment performance standards (SAE J189) with a max working pressure of 250 psi and are suitable for low pressure high temperature operations || All tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime || Each hose is precision engineered to exact fit and includes brackets, grommets, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition || Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 275 degrees Fahrenheit, exceeding original equipment requirements
Sunsong Return Hoses exceed original equipment performance standards (SAE J189) with a max working pressure of 250 psi and are suitable for low pressure high temperature operations || All tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime || Each hose is precision engineered to exact fit and includes brackets, grommets, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition || Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 275 degrees Fahrenheit, exceeding original equipment requirements
Sunsong 3402064 Power Steering Reservoir Hose
Sunsong Return Hoses exceed original equipment performance standards (SAE J189) with a max working pressure of 250 psi and are suitable for low pressure high temperature operations || All tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime || Each hose is precision engineered to exact fit and includes brackets, grommets, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition || Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 275 degrees Fahrenheit, exceeding original equipment requirements
Sunsong Return Hoses exceed original equipment performance standards (SAE J189) with a max working pressure of 250 psi and are suitable for low pressure high temperature operations || All tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime || Each hose is precision engineered to exact fit and includes brackets, grommets, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition || Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 275 degrees Fahrenheit, exceeding original equipment requirements
Sunsong 3402064 Power Steering Reservoir Hose
Sunsong Return Hoses exceed original equipment performance standards (SAE J189) with a max working pressure of 250 psi and are suitable for low pressure high temperature operations || All tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime || Each hose is precision engineered to exact fit and includes brackets, grommets, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition || Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 275 degrees Fahrenheit, exceeding original equipment requirements
Sunsong Return Hoses exceed original equipment performance standards (SAE J189) with a max working pressure of 250 psi and are suitable for low pressure high temperature operations || All tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime || Each hose is precision engineered to exact fit and includes brackets, grommets, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition || Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 275 degrees Fahrenheit, exceeding original equipment requirements
Number on catalog scheme:
2
For full view, you need register
Compatible equipment models: 3402064:
Caterpillar SIS machinery equipment:
Caterpillar SIS
D11T TRACK-TYPE TRACTOR JEL00001-UP (MACHINE) POWERED BY C32 Engine »
340-2064
VALVE & MTG GP-HYDRAULIC FAN
D11T TRACK-TYPE TRACTOR JEL00001-UP (MACHINE) POWERED BY C32 Engine »
340-2064
VALVE & MTG GP-HYDRAULIC FAN
D11T TRACK-TYPE TRACTOR AMA00001-UP (MACHINE) POWERED BY C32 Engine »
340-2064
VALVE & MTG GP-HYDRAULIC FAN
D11T TRACK-TYPE TRACTOR AMA00001-UP (MACHINE) POWERED BY C32 Engine »
340-2064
VALVE & MTG GP-HYDRAULIC FAN
Caterpillar parts catalog:
Information:
Hydraulic oil filter is now fastened to the hydraulic oil supply tank on later machines. 1. Lift truck body (2).
Put two pins, blocks or a long bar in the detents in front of the body pivots. The pieces must be made of steel and have a minimum cross section of 3 in. (76.2 mm).
2. Open drain valve (3) and drain the oil from the hydraulic oil tank (1). 3. Remove four nuts, lockwashers and bolts (6). Remove hydraulic pressure oil line (8) to steering circuit.4. Remove four bolts and lockwashers (5). Remove hydraulic oil return line (7).5. Remove nuts, lockwashers and bolts (4) that hold the tank to the brackets on the fuel tank. 6. Install tool (A) and fasten a hoist.7. Remove bolts and lockwashers (9).8. Remove hydraulic oil supply tank (1). Weight is 187 lb. (84 kg). Capacity is 12.5 U.S. gal. (47.3 litre).9. Install tool (A) and fasten a hoist.10. Put hydraulic tank (1) in position and install lockwashers and bolts (9).11. Install bolts, lockwashers and nuts (4).12. Install hydraulic oil return line (7). Install four lockwashers and bolts (5).13. Install hydraulic pressure oil line (8) from steering circuit. Install four bolts, lockwashers and nuts (6).Disassemble And Assemble Hydraulic Oil Supply Tank And Lines (Steering)
start by:a) remove hydraulic oil supply tank and lines (steering) Check parts when disassembled. If damaged, use new parts for replacement. 1. Remove nuts, lockwashers and bolts (1).2. Remove cover (2) and gasket from tank (4). 3. Remove four nuts (5), retainer (6), glass and grommet.4. Remove cap (3), plunger (8) and strainer (7).5. Remove four bolts and locks (10).6. Remove tube assembly (9).7. Remove two bolts (not shown) that hold drain valve (11) to the tank.8. Remove the plug from the drain valve.9. Wash all metal parts in nonflammable solvent.10. Install plug in drain valve and put drain valve (11) in position on tank (4). Install the two bolts.11. Put tube assembly (9) in position and install four locks and bolts (10).12. Install strainer (7), plunger (8) and cap (3).13. Install grommet, glass, retainer (6) and nuts (5).14. Install gasket and cover (2) on the tank.15. Install bolts, lockwashers and nuts (1).end by:a) install hydraulic oil supply tank and lines (steering)
Put two pins, blocks or a long bar in the detents in front of the body pivots. The pieces must be made of steel and have a minimum cross section of 3 in. (76.2 mm).
2. Open drain valve (3) and drain the oil from the hydraulic oil tank (1). 3. Remove four nuts, lockwashers and bolts (6). Remove hydraulic pressure oil line (8) to steering circuit.4. Remove four bolts and lockwashers (5). Remove hydraulic oil return line (7).5. Remove nuts, lockwashers and bolts (4) that hold the tank to the brackets on the fuel tank. 6. Install tool (A) and fasten a hoist.7. Remove bolts and lockwashers (9).8. Remove hydraulic oil supply tank (1). Weight is 187 lb. (84 kg). Capacity is 12.5 U.S. gal. (47.3 litre).9. Install tool (A) and fasten a hoist.10. Put hydraulic tank (1) in position and install lockwashers and bolts (9).11. Install bolts, lockwashers and nuts (4).12. Install hydraulic oil return line (7). Install four lockwashers and bolts (5).13. Install hydraulic pressure oil line (8) from steering circuit. Install four bolts, lockwashers and nuts (6).Disassemble And Assemble Hydraulic Oil Supply Tank And Lines (Steering)
start by:a) remove hydraulic oil supply tank and lines (steering) Check parts when disassembled. If damaged, use new parts for replacement. 1. Remove nuts, lockwashers and bolts (1).2. Remove cover (2) and gasket from tank (4). 3. Remove four nuts (5), retainer (6), glass and grommet.4. Remove cap (3), plunger (8) and strainer (7).5. Remove four bolts and locks (10).6. Remove tube assembly (9).7. Remove two bolts (not shown) that hold drain valve (11) to the tank.8. Remove the plug from the drain valve.9. Wash all metal parts in nonflammable solvent.10. Install plug in drain valve and put drain valve (11) in position on tank (4). Install the two bolts.11. Put tube assembly (9) in position and install four locks and bolts (10).12. Install strainer (7), plunger (8) and cap (3).13. Install grommet, glass, retainer (6) and nuts (5).14. Install gasket and cover (2) on the tank.15. Install bolts, lockwashers and nuts (1).end by:a) install hydraulic oil supply tank and lines (steering)
Parts valve Caterpillar catalog:
24H, 814F, 815F, 816F, 844, 844H, 844K, 854G, 854K, 980G II, 990 II, 990H, 990K, 992G, 992K, 993K, 994, 994D, 994F, 994H, D11R, D11T, R2900, R2900G, R3000H
561N, 572R, 572R II, 583T, 587T, D10R, D10T, D11R, D11T, D5M, D5N, D5R LGP, D6M, D6N, D6N LGP, D6R, D6R II, D6R III, D6T, D6T LGP, D6T XL, D7E, D7E LGP, D7R, D7R II, D8R II, D8T, D9T, PL83, PL87
16G, 16H NA, 245, 245B, 307, 311, 3116, 312, 3126, 3126B, 3126E, 312D, 312D L, 314D CR, 314D LCR, 315, 317, 3176, 3176B, 3176C, 318D L, 3196, 320 L, 3208, 320D, 320D FM, 320D L, 320D LRR, 320D RR, 320...
1090, 1190, 1190T, 120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 1290T, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 1390, 140B, 140G, 140H, 140H ES, 1...
1090, 1190, 1190T, 120G, 120H, 120H ES, 120H NA, 120M, 1290T, 12G, 12H ES, 12H NA, 12M, 130G, 135H, 135H NA, 1390, 140G, 140H ES, 140H NA, 143H, 14H, 14H NA, 160H ES, 160H NA, 163H NA, 16G, 16H NA, 16...
1090, 1190, 1190T, 120K, 120K 2, 120M, 120M 2, 1290T, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 1390, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 214B, 2...
24M, 3406E, 3456, 365C, 365C L, 365C L MH, 374D L, 374F L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 583T, 587T, 621B, 621G, 623G, 627F, 627G, 631D, 631E, 631G, 633E II, 637D, 637E...
24M, 3406E, 3456, 365C, 365C L, 365C L MH, 374D L, 374F L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B, 583T, 587T, 621B, 621G, 623G, 627F, 627G, 631D, 631E, 631G, 633E II, 637...
24M, 3406E, 3456, 365C, 365C L, 365C L MH, 385B, 385C, 385C FS, 385C L, 385C L MH, 5090B, 583T, 587T, 621G, 623G, 627F, 627G, 631D, 631G, 637G, 651B, 657B, 657E, 657G, 735, 740, 770, 772, 773F, 773G, ...
1090, 1190, 1190T, 120H, 120H ES, 120H NA, 120K, 120K 2, 1290T, 12H, 12K, 135H, 135H NA, 1390, 140H, 140K, 140K 2, 143H, 14H, 160H, 160K, 163H, 16H, 216B, 216B3, 226B, 226B3, 2290, 232B, 236B, 236B3, ...
1090, 1190, 1190T, 120H, 120K, 120K 2, 1290T, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 1390, 140G, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160K, 160M 2, 160M 3, 160M 3 AWD, 16M, 236D, 242...
1090, 1190, 1190T, 1290T, 1390, 205B, 211B, 215, 215B, 225, 227, 229, 2290, 231D, 235, 235C, 235D, 2390, 2391, 245, 2491, 2590, 307, 307B, 307C, 307D, 307E, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 C...
3574903
VALVE GP-FLOW CONTROL
D10T2, D11T, PC206, SW60
D10T2, D11T, PC206, SW60
D10R, D10T, D11R, D11T, D9R, D9T