VALVE GP-EXHAUST GAS (NRS) 3407208 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9U-6758 Pin Driver Cap 1
Illustration 1 g00885740
Use a hoist and lifting slings to position bucket cylinder (4). Connect hose assemblies (6). The weight of the cylinder for the H-Family Bucket is approximately 660 kg (1450 lb). The weight of the cylinder for the J-Family Bucket is approximately 885 kg (1950 lb).
Illustration 2 g00885799Note: Install the shims, if equipped.
Use a hoist and a lifting sling to position pin assembly (7). Use Tooling (A) and a hammer to install the pin assembly. The weight of pin assembly (7) is approximately 43 kg (95 lb).
Illustration 3 g00885823
Connect lubrication hose assembly (8) and install bolt (9).
Illustration 4 g00885876
Use a hoist and a lifting sling to position pin assembly (5). Use Tooling (A) and a hammer to install the pin assembly. The weight of pin assembly (5) is approximately 77 kg (170 lb) for the H-Family Bucket. The weight of pin assembly (5) is approximately 105 kg (230 lb) for the J-Family Bucket.
Illustration 5 g00885453
Position plate (3) and install bolts (2).
Remove the cribbing.