3418323 VALVE GP-RELIEF Caterpillar parts
928G, 928HZ, IT28G
Rating:
Alternative (cross code) number:
CA3418323
341-8323
3418323
CA3418323
341-8323
3418323
Weight: 1 pounds 0 kg.
INTEGRATED TOOLCARRIER, WHEEL LOADER,
Compatible equipment models: 3418323:
Number on catalog scheme:
5
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the front cover. Refer to Disassembly and Assembly, "Front Cover - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Do not turn the crankshaft or the camshaft while the camshaft gear is removed. If the front gear group is not correctly timed during installation, interference can occur between the pistons and the valves, resulting in damage to the engine.
Illustration 1 g01010536
Position the No. 1 piston at the top center of the compression stroke. Refer to Testing and Adjusting, "Finding Top Center Position for No. 1 Piston".
Verify that the timing mark on camshaft gear (1) is aligned with Timing Mark (X) on front housing (3).
Remove bolts (2) and remove camshaft gear (1).Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Do not turn the crankshaft or the camshaft while the camshaft gear is removed. If the front gear group is not correctly timed during installation, interference can occur between the pistons and the valves, resulting in damage to the engine.
Install the Camshaft Gear in the reverse order of the removal.
Illustration 2 g00593987
Torque sequence for the camshaft gear
Tighten the bolts for the camshaft gear in a numeric sequence 1, 4, 2, 5, 3, 6, 1, 4 to a torque of 240 40 N m (180 30 lb ft).
Check the backlash between the camshaft gear and the adjustable idler gear. The backlash should be 0.356 0.254 mm (0.014 0.010 inch). Refer to Testing and Adjusting, "Gear Group (Front) - Time" for the backlash adjustment procedure.End By:
Install the front cover. Refer to Disassembly and Assembly, "Front Cover - Install".
Perform a timing calibration. Refer to Troubleshooting, "Timing- Calibration".
Start By:
Remove the front cover. Refer to Disassembly and Assembly, "Front Cover - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Do not turn the crankshaft or the camshaft while the camshaft gear is removed. If the front gear group is not correctly timed during installation, interference can occur between the pistons and the valves, resulting in damage to the engine.
Illustration 1 g01010536
Position the No. 1 piston at the top center of the compression stroke. Refer to Testing and Adjusting, "Finding Top Center Position for No. 1 Piston".
Verify that the timing mark on camshaft gear (1) is aligned with Timing Mark (X) on front housing (3).
Remove bolts (2) and remove camshaft gear (1).Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Do not turn the crankshaft or the camshaft while the camshaft gear is removed. If the front gear group is not correctly timed during installation, interference can occur between the pistons and the valves, resulting in damage to the engine.
Install the Camshaft Gear in the reverse order of the removal.
Illustration 2 g00593987
Torque sequence for the camshaft gear
Tighten the bolts for the camshaft gear in a numeric sequence 1, 4, 2, 5, 3, 6, 1, 4 to a torque of 240 40 N m (180 30 lb ft).
Check the backlash between the camshaft gear and the adjustable idler gear. The backlash should be 0.356 0.254 mm (0.014 0.010 inch). Refer to Testing and Adjusting, "Gear Group (Front) - Time" for the backlash adjustment procedure.End By:
Install the front cover. Refer to Disassembly and Assembly, "Front Cover - Install".
Perform a timing calibration. Refer to Troubleshooting, "Timing- Calibration".
Caterpillar SIS machinery equipment:
Caterpillar SIS
928G Wheel Loader 6XR00001-UP (MACHINE) POWERED BY 3116 Engine »
341-8323
VALVE GP-RELIEF
928G Wheel Loader 7SR00001-02267 (MACHINE) POWERED BY 3116 Engine »
341-8323
VALVE GP-RELIEF
928G Wheel Loader IT28G Integrated Toolcarrier DBT00001-01676 (MACHINE) POWERED BY 3056E Engine »
341-8323
VALVE GP-RELIEF
928G Wheel Loader and IT28G Integrated Toolcarrier WAC00001-UP (MACHINE) POWERED BY 3056E Engine »
341-8323
VALVE GP-RELIEF
928HZ 930H Wheel Loader CXK00001-02021 (MACHINE) POWERED BY C6.6 Engine »
341-8323
VALVE GP-RELIEF
928Hz 930H Wheel Loader BYD00001-UP (MACHINE) POWERED BY C6.6 Engine »
341-8323
VALVE GP-RELIEF
Caterpillar parts catalog:
Parts valve Caterpillar catalog:
120G, 130G, 14G, 1673C, 215, 225, 225D, 227, 229, 231D, 235, 3114, 3116, 3208, 3304, 3306, 3306B, 518, 528, 584, 613B, 815, 920, 924G, 924GZ, 924H, 924HZ, 924K, 928H, 928HZ, 930G, 930K, 938K, 941, 950...
1090, 1190, 1190T, 120G, 120H, 120H ES, 120H NA, 120M, 1290T, 12G, 12H ES, 12H NA, 12M, 130G, 135H, 135H NA, 1390, 140G, 140H ES, 140H NA, 143H, 14H, 14H NA, 160H ES, 160H NA, 163H NA, 16G, 16H NA, 16...
307, 307B, 312, 3126B, 312B L, 315, 315B L, 317, 317B LN, 318B, 320B, 322B LN, 325B L, 330B L, 345B, 345B II, 345B II MH, 345B L, 350, 365B, 365B II, 375, 446B, 5080, 554, 564, 570B, 574, 574B, 580B, ...
1090, 1190, 1190T, 120K, 120K 2, 120M, 120M 2, 1290T, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 1390, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 214B, 2...
3054, 3054B, 3056, 3056E, 312C, 550B, 554, 560B, 564, 574B, 924G, 924GZ, 930G, AP-655C, AP-800C, BB-760, BG-225B, BG-225C, CB-534C, CB-535B, CP-433C, CP-433E, CP-573E, CP-663E, CS-431C, CS-433C, CS-56...
3054, 3056, 3056E, 312B L, 315B L, 416C, 416D, 420D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 550B, 560B, 564, 574B, 908, 924G, 924GZ, 930G, AP-655C, BB-760, CB-434C, CP-573E, CP-663E, CS...
120H, 120H ES, 120H NA, 135H, 135H NA, 30/30, 3116, 3126, 320B, 322B L, 322B LN, 322C, 322C FM, 325B L, 35, 45, 525B, 533, 535B, 539, 543, 55, 550, 561M, 570, 574, 580, 613C II, 928G, 938F, 938G, 950F...
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 323D2 L, 420E, 430E, 450E, 525D, 535D, 545D, 553C, 559, 613G, 914G, 924H, 924HZ, 924K, 928H, 928HZ, 930K, 938H, 938K, 950 GC, 953D, 963D, AP-600D, AP-655D, A...
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 323D2 L, 420E, 430E, 450E, 525D, 535D, 545D, 553C, 559, 613G, 914G, 924H, 924HZ, 924K, 928H, 928HZ, 930K, 938H, 938K, 950 GC, 953D, 963D, AP-600D, AP-655D, A...
120M, 12M, 2470C, 311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 315D L, 318D L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D...
120H, 120H ES, 120H NA, 120M, 120M 2, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 14...
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 5110B, 5130B, 735, 740, 784C, 785C, 785D, 789C, 793C, 793D, 797, 914G, 924F, 9...
966G, 966G II, 972G, 972G II
6E2920
VALVE GP-MANIFOLD & RELIEF
988B, 988F, 988F II
988B, 988F, 988F II
1737455
VALVE GP-SOLENOID
539, 988H, 992K, 993K, 994H
539, 988H, 992K, 993K, 994H
120H, 120H ES, 12H, 12H ES, 135H, 140H, 140H ES, 143H, 160H, 160H ES, 163H, 163H NA, 16H
2597485
VALVE AR-ALT PATTERN CONTROL
320D, 320D L, 323D L
320D, 320D L, 323D L
2184661
VALVE GP-CONTROL
R1300, R1300G, R1300G II, R1600, R1600G, R1600H
R1300, R1300G, R1300G II, R1600, R1600G, R1600H
9J0798
VALVE GP-RELIEF
910E, 931, 931B, 931C, 931C II, 935B, 935C, 935C II, D3, D3B, D4B, IT12, IT12B, IT14B
910E, 931, 931B, 931C, 931C II, 935B, 935C, 935C II, D3, D3B, D4B, IT12, IT12B, IT14B
3237737
VALVE GP-CONTROL
345C, 345C L
345C, 345C L
1147328
VALVE GP-RELIEF
350, 375, 375 L, 5080
350, 375, 375 L, 5080
1100923
VALVE GP-SYNCHRONIZING
953C, 963C
953C, 963C