3426663 VALVE GP-BANK 3 Caterpillar parts
450E, 450F
Rating:
Alternative (cross code) number:
CA3426663
342-6663
3426663
CA3426663
342-6663
3426663
Weight: 64 pounds 29 kg.
BACKHOE LOADER,
Number on catalog scheme:
For full view, you need register
Information:
Troubleshooting Overview
Flash programming is a method of programming or updating the flash file in the Electronic Control Module (ECM). Cat® Electronic Technician (ET) is used to flash program a file into the memory of the ECM.Note: Customer versions of Cat ET do not have the capability for flash programming. Consult your local Cat Dealer for assistance.Use the "Flash File Search" tool on the Service Technician Workbench (STW) to obtain the flash file for your machine. Alternatively, use the "Service Software Files" feature on SIS Web to obtain the flash file for your machine. You must have the machine serial number to search for the flash file. After locating the correct flash file, download the flash file to your PC. Write down the name of the flash file for future reference.Troubleshooting Procedure
Table 1
Troubleshooting Test Steps Values Results
1. Programming a Flash File
A. Establish communication between Cat ET and the ECM.
B. Download an ECM replacement file. This file will help in the transfer of saved configurations for the Implement ECM and calibration values for solenoids and linkage sensors.
C. Select "WinFlash" from the "Utilities" menu on Cat ET.
If "WinFlash" will not communicate with the ECM, refer to Troubleshooting, UENR0515, "Electronic Service Tool Does Not Communicate".
D. Program the flash file into the ECM.
E. Select the appropriate ECM under the "Detected ECM modules".
F. Press the "Browse" button to select the name of the flash file that will be programmed into the ECM.
G. When the correct flash file is selected, press the "Open" button.
H. Verify that the "File Values" match the application. If the "File Values" do not match the application, obtain the correct flash file.
J. When the correct flash file is selected, press the "Begin Flash" button.
K. Cat ET will indicate when flash programming has been successfully completed.
L. Start the machine and check for proper operation. Repair any active diagnostic or event codes.
Programmed successfully. OK - The flash programming was successful. Return the unit to service.
STOP.
NOT OK - The flash programming was not successful.
Repair: Repair any active diagnostic or event codes.
Proceed to Test Step 2.
2. "WinFlash" Error Messages
A. If you receive any error messages during flash programming, click on the "Cancel" button to stop the process. Access the information about the "ECM Summary" under the "Information" menu. Make sure that you are flashing the correct file for your machine.
B. Record all error messages. The recorded error messages will be necessary if further assistance is needed.
Error messages. OK - There are no error messages. Return the unit to service.
STOP.
NOT OK - Error messages remain. Record all error messages.
Repair: If there are no active diagnostic or event codes and the proper flash file has been selected, the ECM may have failed. Prior to replacing an ECM, always contact the Technical Communicator for your dealership for possible consultation with Caterpillar®. This consultation may greatly reduce repair time.
If the ECM requires replacement, see the Troubleshooting, "ECM - Replace" section of this manual for additional information.
STOP.
Flash programming is a method of programming or updating the flash file in the Electronic Control Module (ECM). Cat® Electronic Technician (ET) is used to flash program a file into the memory of the ECM.Note: Customer versions of Cat ET do not have the capability for flash programming. Consult your local Cat Dealer for assistance.Use the "Flash File Search" tool on the Service Technician Workbench (STW) to obtain the flash file for your machine. Alternatively, use the "Service Software Files" feature on SIS Web to obtain the flash file for your machine. You must have the machine serial number to search for the flash file. After locating the correct flash file, download the flash file to your PC. Write down the name of the flash file for future reference.Troubleshooting Procedure
Table 1
Troubleshooting Test Steps Values Results
1. Programming a Flash File
A. Establish communication between Cat ET and the ECM.
B. Download an ECM replacement file. This file will help in the transfer of saved configurations for the Implement ECM and calibration values for solenoids and linkage sensors.
C. Select "WinFlash" from the "Utilities" menu on Cat ET.
If "WinFlash" will not communicate with the ECM, refer to Troubleshooting, UENR0515, "Electronic Service Tool Does Not Communicate".
D. Program the flash file into the ECM.
E. Select the appropriate ECM under the "Detected ECM modules".
F. Press the "Browse" button to select the name of the flash file that will be programmed into the ECM.
G. When the correct flash file is selected, press the "Open" button.
H. Verify that the "File Values" match the application. If the "File Values" do not match the application, obtain the correct flash file.
J. When the correct flash file is selected, press the "Begin Flash" button.
K. Cat ET will indicate when flash programming has been successfully completed.
L. Start the machine and check for proper operation. Repair any active diagnostic or event codes.
Programmed successfully. OK - The flash programming was successful. Return the unit to service.
STOP.
NOT OK - The flash programming was not successful.
Repair: Repair any active diagnostic or event codes.
Proceed to Test Step 2.
2. "WinFlash" Error Messages
A. If you receive any error messages during flash programming, click on the "Cancel" button to stop the process. Access the information about the "ECM Summary" under the "Information" menu. Make sure that you are flashing the correct file for your machine.
B. Record all error messages. The recorded error messages will be necessary if further assistance is needed.
Error messages. OK - There are no error messages. Return the unit to service.
STOP.
NOT OK - Error messages remain. Record all error messages.
Repair: If there are no active diagnostic or event codes and the proper flash file has been selected, the ECM may have failed. Prior to replacing an ECM, always contact the Technical Communicator for your dealership for possible consultation with Caterpillar®. This consultation may greatly reduce repair time.
If the ECM requires replacement, see the Troubleshooting, "ECM - Replace" section of this manual for additional information.
STOP.
Caterpillar SIS machinery equipment:
Caterpillar SIS
450E Backhoe Loader Center Pivot EBL00001-UP (MACHINE) POWERED BY C4.4 Engine »
342-6663
VALVE GP-BANK 3
450E Backhoe Loader RBA00001-UP (MACHINE) POWERED BY C4.4 Engine »
342-6663
VALVE GP-BANK 3
450F Backhoe Loader HJR00001-UP (MACHINE) POWERED BY C4.4 Engine »
342-6663
VALVE GP-BANK 3
450E Backhoe Loader LYR00001-UP (MACHINE) POWERED BY C4.4 Engine »
342-6663
VALVE GP-BANK 3
Caterpillar parts catalog:
Parts valve Caterpillar catalog:
12E, 12F, 14E, 414E, 416, 416B, 416C, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 424D, 426, 426B, 426C, 428, 428B, 428C, 428D, 428E, 428F, 430D, 430E, 430F, 432D, 432E, 432F, 434E, 434F, 436, 436...
414E, 416C, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 424D, 426C, 428C, 428D, 428E, 428F, 430D, 430E, 430F, 432D, 432E, 432F, 434E, 434F, 436C, 438C, 438D, 442D, 442E, 444E, 444F, 446B, 446D, 45...
3484581
VALVE GP-CONTROL
450E, 450F
450E, 450F
2710545
VALVE GP-CONTROL
450E, 450F
450E, 450F
3000430
VALVE GP-PRESSURE REDUCING
450E, 450F
450E, 450F
1090, 1190, 1190T, 120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 1290T, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 1390, 140B, 140G, 140H, 140H ES, 1...
1090, 1190, 1190T, 120K, 120K 2, 120M, 120M 2, 1290T, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 1390, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 214B, 2...
1090, 1190, 1190T, 1290T, 1390, 216, 216B, 216B3, 226B, 226B3, 2290, 232B, 236, 236B, 236B3, 2390, 2391, 242B, 242B3, 247, 247B, 247B3, 2491, 252B, 252B3, 257B, 257B3, 2590, 259B3, 267, 267B, 268B, 28...
420E, 430E, 432E, 434E, 442E, 444E, 450E, 450F, TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 323D2 L, 420E, 430E, 450E, 525D, 535D, 545D, 553C, 559, 613G, 914G, 924H, 924HZ, 924K, 928H, 928HZ, 930K, 938H, 938K, 950 GC, 953D, 963D, AP-600D, AP-655D, A...
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 323D2 L, 420E, 430E, 450E, 525D, 535D, 545D, 553C, 559, 613G, 914G, 924H, 924HZ, 924K, 928H, 928HZ, 930K, 938H, 938K, 950 GC, 953D, 963D, AP-600D, AP-655D, A...
120M, 12M, 2470C, 311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 315D L, 318D L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D...
3426662
VALVE GP-BANK 2
450E, 450F
450E, 450F
2710512
VALVE GP-BANK 2
450E, 450F
450E, 450F
2787758
VALVE & LINES GP-PILOT
450E, 450F
450E, 450F
2710546
VALVE GP-CONTROL
450E, 450F
450E, 450F
2710545
VALVE GP-CONTROL
450E, 450F
450E, 450F
2710541
VALVE GP-CONTROL
450E, 450F
450E, 450F
2710523
VALVE GP-CONTROL
450E, 450F
450E, 450F
2710522
VALVE GP-CONTROL
450E, 450F
450E, 450F
2710528
VALVE GP-BANK 8
450E, 450F
450E, 450F