VALVE GP-DIVERTER 3433185 - Caterpillar

Bulldozer
Bulldozer Blade Height
Float (1) - Push the lever all the way forward into detent, for FLOAT. The blade moves up and down following the ground contour.The lever remains in float until pulled out of detent. The lever then returns to HOLD position when released. Lower (2) - Push the lever forward to lower the blade. The lever returns to HOLD position when released. Hold (3) - The lever returns to HOLD position when released from either RAISE or LOWER. The blade remains in the position it is in. Raise (4) - Pull the lever back to raise the blade. Release the lever to stop lifting the blade. The lever returns to HOLD position when released.Bulldozer Blade Tilt (Standard)
Tilt Left (1) - Pull the lever to the left to lower the blade to the left. The lever returns to HOLD position when released. Tilt Hold (2) - The lever returns to HOLD position when released. The blade movement stops. Tilt Right (3) - Push the lever to the right to lower the blade to the right. The lever returns to HOLD position when released.Bulldozer Blade Dual Tilt (If Equipped)
Float (1) - Push the lever all the way forward into detent for blade float. In this position, the blade moves up and down following the ground contour.The lever remains in the FLOAT position (detent) until manually pulled out of DETENT position. The lever then returns to HOLD position. Lower (2) - Push the lever forward to lower the blade. Release the lever and it returns to HOLD position. Hold (3) - Release the lever from raise or lower, and it returns to HOLD position. The blade movement stops. Raise (4) - Pull the lever back to raise the blade. Release the lever and it returns to HOLD position. Use the toggle switch on top of control grip for speed and hydraulic force before tilting blade left or right. Move the toggle rearward for faster tilt speed. Move the toggle forward for slower tilt speed and greater blade force. Use for prying a rock loose, etc. Rearward and forward tilt speeds are not affected by the toggle switch. Tilt Left (1) - Move the lever to the left to lower the blade to the left. Tilt Hold (2) - Release the lever from any position and it returns to HOLD position. The blade movement stops. Tilt Right (3) - Move the lever to the right to lower the blade to the right. Tilt Rearward - Hold the trigger in on the control grip. Move the lever to position (1) to tilt the blade back. Tilting the blade to the rear improves the ability of the blade to carry the load. Tilt Forward - Hold the trigger in on the control grip. Move the lever to position (3) to tilt the blade forward. Tilting the blade forward improves blade penetration. It also helps dump the load.Dozer Control Lever Restraint
Control lever restraints are designed to prevent unintentional control lever movement. The restraints are