3434829 VALVE GP-RELIEF Caterpillar parts
CB-22, CB-334E, CB-34
Rating:
Alternative (cross code) number:
CA3434829
343-4829
3434829
CA3434829
343-4829
3434829
Weight: 0.41 pounds 0 kg.
VIBRATORY COMPACTOR,
Number on catalog scheme:
4
For full view, you need register
Information:
Disassembly Procedure
Start By:
Remove the control manifold. Refer to Disassembly and Assembly, "Control Manifold (Pilot Oil) - Remove".Note: Cleanliness is an important factor. Before you begin the disassembly procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism. Precision components can be damaged by contaminants or by dirt. Perform disassembly procedures on a clean work surface. Keep components covered and protected at all times.Note: Put marks for orientation and location marks on all fittings for installation purposes.
Illustration 1 g00889457
Loosen nut (2) and remove accumulator (1). Remove hex head bolts (3) and solenoid assemblies (4) .
Illustration 2 g00889491
Plungers (6) and plates (7) are nonserviceable.
Remove plates (7) and plungers (6) from solenoid assemblies (4) .
Remove O-ring seals (5) from plungers (6) .
Illustration 3 g00889798
Valves (8) are nonserviceable.
Remove valves (8) from the manifold.
Illustration 4 g00889824
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Illustration 5 g00889833
Valve (12) is nonserviceable.
Remove plug (9) and fitting (10). Remove the O-ring seal from fitting (10) .
Remove valve (12) and spring (11). Remove O-ring seal (13) from plug (9) .
Illustration 6 g00889898
Remove fittings (14) from the manifold. Remove the O-ring seals from fittings (14) .
Illustration 7 g00889922
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Illustration 8 g00889994
Remove plug (15). Remove the O-ring seal from plug (15) .
Remove plugs (15A). Remove the O-ring seals from plugs (15A) .
Remove plug (16) .
Remove spring (18) and valve (17) from the manifold. Remove O-ring seal (19) from plug (16) .
Illustration 9 g00890036
Remove fitting (20) and plugs (21) from the manifold. Remove the O-ring seals from fitting (20) and from plugs (21) .
Illustration 10 g00890052
Remove fittings (23) and plugs (22). Remove the O-ring seals from fittings (23) and from plugs (22) .
Start By:
Remove the control manifold. Refer to Disassembly and Assembly, "Control Manifold (Pilot Oil) - Remove".Note: Cleanliness is an important factor. Before you begin the disassembly procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism. Precision components can be damaged by contaminants or by dirt. Perform disassembly procedures on a clean work surface. Keep components covered and protected at all times.Note: Put marks for orientation and location marks on all fittings for installation purposes.
Illustration 1 g00889457
Loosen nut (2) and remove accumulator (1). Remove hex head bolts (3) and solenoid assemblies (4) .
Illustration 2 g00889491
Plungers (6) and plates (7) are nonserviceable.
Remove plates (7) and plungers (6) from solenoid assemblies (4) .
Remove O-ring seals (5) from plungers (6) .
Illustration 3 g00889798
Valves (8) are nonserviceable.
Remove valves (8) from the manifold.
Illustration 4 g00889824
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Illustration 5 g00889833
Valve (12) is nonserviceable.
Remove plug (9) and fitting (10). Remove the O-ring seal from fitting (10) .
Remove valve (12) and spring (11). Remove O-ring seal (13) from plug (9) .
Illustration 6 g00889898
Remove fittings (14) from the manifold. Remove the O-ring seals from fittings (14) .
Illustration 7 g00889922
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Illustration 8 g00889994
Remove plug (15). Remove the O-ring seal from plug (15) .
Remove plugs (15A). Remove the O-ring seals from plugs (15A) .
Remove plug (16) .
Remove spring (18) and valve (17) from the manifold. Remove O-ring seal (19) from plug (16) .
Illustration 9 g00890036
Remove fitting (20) and plugs (21) from the manifold. Remove the O-ring seals from fitting (20) and from plugs (21) .
Illustration 10 g00890052
Remove fittings (23) and plugs (22). Remove the O-ring seals from fittings (23) and from plugs (22) .
Caterpillar parts catalog:
Parts valve Caterpillar catalog:
2610857
VALVE & MTG GP-FLOW DIVIDER
CB-334E, CB-34
CB-334E, CB-34
1090, 1190, 1190T, 120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 1290T, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 1390, 140B, 140G, 140H, 140H ES, 1...
1090, 1190, 1190T, 120, 120B, 120G, 120H, 120H ES, 120H NA, 1290T, 12F, 12G, 12H, 12H NA, 130G, 135H, 135H NA, 1390, 140, 140B, 140G, 140H, 140H NA, 143H, 14E, 14H, 16, 160H, 163H, 16G, 16H NA, 16M, 2...
3114, 3116, 3126B, 3176, 3176B, 3176C, 3196, 3406B, 3412E, 35, 3512, 45, 55, 613C, 613C II, 613G, 69D, 936, 936F, 980F, 980G, AD30, AD40, AD45, AD55, AE40, AE40 II, AP-1000B, AP-1055B, AP-1055D, AP-90...
216, 216B, 216B3, 226B, 226B3, 232B, 242B, 247B, 247B3, 257B, 3013C, 3024, 3024C, 304.5, 902, AP-255E, BB-621C, C1.1, C1.5, C2.2, CB-214E, CB-22, CB-334E, CB-34, CB22B, CB24B, CB32B, CB34B, CB34B XW, ...
216, 216B, 216B3, 226B, 232B, 242B, 247B, 257B, 3013C, 3024, 3024C, 304.5, 902, AP-255E, BB-621C, C1.1, C1.5, C2.2, CB-214E, CB-22, CB-334E, CB-34, CB22B, CB24B, CB32B, CB34B, CB34B XW, CC24B, CC34B
1090, 1190, 1190T, 120H, 120H ES, 120H NA, 120K, 120K 2, 1290T, 12H, 12K, 135H, 135H NA, 1390, 140H, 140K, 140K 2, 143H, 14H, 160H, 160K, 163H, 16H, 216B, 216B3, 226B, 226B3, 2290, 232B, 236B, 236B3, ...
120G, 12G, 130G, 140G, 14G, 160G, 16G, 30/30, 518, 518C, 528, 528B, 530B, 69D, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 773E, 775B, 775D, 775E, 776C, 776D, 777D, 784C, 785, 785B, 785C, 785D, 789, 789...
2273969
VALVE GP-SOLENOID
CB-14, CB-214E, CB-22, CB-334E, CB-34
CB-14, CB-214E, CB-22, CB-334E, CB-34
3434828
VALVE GP-COUNTERBALANCE
CB-22, CB-334E, CB-34
CB-22, CB-334E, CB-34
3434827
VALVE GP-RELIEF
CB-22, CB-334E, CB-34
CB-22, CB-334E, CB-34
2661423
VALVE AS
CB-334E, CB-34
CB-334E, CB-34
2641908
VALVE GP-RELIEF
CB-334E, CB-34
CB-334E, CB-34
2273968
VALVE GP-RELIEF
CB-334E, CB-34
CB-334E, CB-34
2635153
VALVE GP-CONTROL
CB-334E, CB-34
CB-334E, CB-34
2554530
VALVE GP-ROTARY
RM-500
RM-500
2554532
VALVE GP-CHECK
RM-500
RM-500
3321452
VALVE GP-SOLENOID
10-20B, 8-16B, AP-1055D, AS3251C, AS3301C, BG-2455D, BG-260D
10-20B, 8-16B, AP-1055D, AS3251C, AS3301C, BG-2455D, BG-260D
3232863
VALVE AS-CHECK
CB-22, CB-334E, CB-34
CB-22, CB-334E, CB-34
2634736
VALVE GP-SOLENOID
CB-22, CB-334E, CB-34
CB-22, CB-334E, CB-34