VALVE GP-SOLENOID & RELIEF 3450785 - Caterpillar

- Remove/Inspect/Clean
Log Loader Pillar Base Mounting Bolts - Inspect/Replace/Tighten
Log Loader Pillar Base Oil - Change
Initial 250 Service Hours
Transmission Gearbox Oil - Change
Initial 250 Service Hours (or at first oil change)
Engine Valve Lash - Check
Every 250 Service Hours
Engine Oil Sample - Obtain
Engine Oil and Filter - Change
Tire Inflation - Check
Every 250 Service Hours or Monthly
Articulation Bearings - Lubricate
Belt - Inspect/Adjust/Replace
Drive Shaft Universal Joints (Front and Rear) - Lubricate
Gate Cylinder Bearings - Lubricate
Hydraulic Rotator (Grapple) Mounting Pin - Check/Tighten
Log Loader Extendable Stick Bearings - Inspect
Log Loader Pillar Base Mounting Bolts - Inspect/Replace/Tighten
Initial 500 Service Hours
Machine System Pressures - Test/Adjust
Initial 500 Hours (for New Systems, Refilled Systems, and Converted Systems)
Cooling System Coolant Sample (Level 2) - Obtain
Every 500 Service Hours
Bogie Oil Sample - Obtain
Cooling System Coolant Sample (Level 1) - Obtain
Differential Oil Sample - Obtain
Final Drive Oil Sample - Obtain
Hydraulic System Oil Sample - Obtain
Transmission Gearbox Oil Sample - Obtain
Every 500 Service Hours or 3 Months
Bogie Oil Level - Check
Differential Oil Level - Check
Engine Oil and Filter - Change
Final Drive Oil Level - Check
Fuel System Secondary Filter - Replace
Fuel System Water Separator Element - Replace
Fuel Tank Cap and Strainer - Clean
Log Loader Grapple Mounting Bolts - Check/Tighten
Oil Filter (Implement Case Drain) - Replace
Oil Filter (Implement Return) - Replace
Oil Filter (Power Train Charging System) - Replace
Every 1000 Service Hours or 6 Months
Battery - Clean
Bogie Pivot Bearings - Lubricate
Cab Door Hinges - Lubricate
Cab Tilt Hydraulic System Oil Level - Check
Drive Shaft Support Bearing - Lubricate
Hydraulic Rotator (Grapple) Magnetic Plug - Remove/Inspect/Clean
Log Loader Pillar Base Oil - Change
Machine System Pressures - Test/Adjust
Parking Brake - Test
Every 2000 Service Hours or 1 Year
Bogie Oil - Change
Brake Discs - Check
Differential Oil - Change
Engine Crankcase Breather - Replace
Engine Valve Lash - Check
Final Drive Oil - Change
Hoses and Clamps - Inspect/Replace
Hydraulic System Oil - Change
Refrigerant Dryer - Replace
Transmission Gearbox Oil - Change
Every Year
Cooling System Coolant Sample (Level 2) - Obtain
Engine Air Filter Primary Element - Clean/Replace
Every 3 Years After Date of Installation or Every 5 Years After Date of Manufacture
Seat Belt - Replace
Every 4000 Service Hours or 2 Years
Cooling System Water Temperature Regulator - Replace
Every 6000 Service Hours or 3 Years
Cooling System Coolant Extender (ELC) - Add
Every 12 000 Service Hours or 6 Years
Cooling System Coolant (ELC) - Change