VALVE AS-WATER 3605868 - Caterpillar

Illustration 1 g01449473
(1) Accessory drive gear (2) Idler gear assembly (7) Crankshaft gearNote: Install the socket setscrew to the bottom of the threaded hole. (3) Torque for the socket setscrew ... 6 1 N m (55 9 lb in) (4) Dimensions for pump drive shaft assembly Diameter of new pump drive shaft ... 74.900 0.015 mm (2.9488 0.0006 inch) Bore in sleeve bearing after assembly ... 75.000 0.055 mm (2.9527 0.0022 inch)Note: Align the oil hole in the bearing with the oil hole in the adapter. (5) Lubricate the bore of the four O-ring seals lightly with the lubricant that is being sealed. (6) Dimensions for thrust washer Thickness of new thrust washer ... 8.50 0.05 mm (0.335 0.002 inch) Width of groove in pump drive shaft ... 8.750 0.025 mm (0.3445 0.0010 inch) End play for pump drive shaft ... 0.175 to 0.325 mm (0.0069 to 0.0128 inch) (8) Dimensions for shaft Diameter of new shaft ... 105.88 0.02 mm (4.168 0.001 inch) Installation depth of bearing in the idler gear ... 2.3 0.5 mm (0.09 0.02 inch) Bore in bearing after assembly ... 105.970 0.010 mm (4.1720 0.0004 inch)