VALVE GP-SELECTOR & PRESS CONT 3656746 - Caterpillar

Assembly Procedure
Illustration 1 g01304985
Install plug (31) and plug (30).
Illustration 2 g01304968
Install O-ring seal (29), ring (28), and O-ring seal (27).
Illustration 3 g01304964
Install plug (26). Install relief valve (25). Tighten relief valve (25) to a torque of 34 to 36.7 N m (25 to 27 lb ft).
Illustration 4 g01304961
Install orifice plug (24). Tighten orifice plug (24) to a torque of 47.5 N m (35 lb ft).
Illustration 5 g01304958
Install ring (23), O-ring seal (22), and O-ring seal (21).
Illustration 6 g01304957
Install ring (20), O-ring seal (19), ring (18), ring (17), O-ring seal (16), ring (15), and O-ring seal (14).
Illustration 7 g01304951
Install ring (13), O-ring seal (12),and O-ring seal (11).
Illustration 8 g01304949
Install check valve (10). Tighten check valve (10) to a torque of 149 to 176 N m (110 to 130 lb ft). Install control valve (9). Tighten control valve (9) to a torque of 88 to 102 N m (65 to 75 lb ft). Install cartridge (8). Tighten cartridge (8) to a torque of 31 3 N m (23 2 lb ft).
Illustration 9 g01304946
Install solenoid (7). Install nut (6). Tighten nut (6) to a torque of 5.3 1.5 N m (47 13 lb in). Install plug (4) and plug (5).
Illustration 10 g01304936
Install orifice plug (1). Tighten orifice plug (1) to a torque of 10.8 N m (96 lb in). Install orifice plug (2). Tighten orifice plug (2) to a torque of 10.8 N m (96 lb in). Install plug (3). End By:
Install the manifold valve (rear axle, lubrication, and steering).