VALVE GP-CONTROL 3666688 - Caterpillar

Illustration 16 g01243004
Install O-ring seals (28), O-ring seal (27), and springs (29).
Illustration 17 g01243003
Install bearing (26) and port plate (25).
Illustration 18 g01243001
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install head (23) and bolts (24). Tighten bolts (24) to a torque of 29 5 N m (21 4 lb ft).
Illustration 19 g01243000
Install poppet (22).
Illustration 20 g01242998
Install spring (21).
Illustration 21 g01242996
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install the O-ring seal and plug (20). Tighten plug (20) to a torque of 196 15 N m (145 11 lb ft).
Illustration 22 g01242992
Install washers (16), coupling (17), washer (18), and setscrews (19).
Illustration 23 g01242991
Install bearings (14), gear (15), and gears (13).
Illustration 24 g01242989
Install retainers (12) and bolts (11). Tighten bolts (11) to a torque of 33 5 N m (24 4 lb ft).
Illustration 25 g01242988
Install carrier (9) and washer (10).
Illustration 26 g01242987
Install bearings (7), gear (8), and gears (6).
Illustration 27 g01242984
Install retainer (5) and bolts (4). Tighten bolts (4) to a torque of 33 5 N m (24 4 lb ft).
Illustration 28 g01242982
Install cover (3), ring (1), and plug (2). Tighten plug (2) to a torque of 59 10 N m (44 7 lb ft). End By:
Install the final drive and the travel motor. Refer to Disassembly and Assembly, "Final Drive and Travel Motor - Install".