VALVE GP-SOLENOID & PRESS REDC 3714745 - Caterpillar

Lines Group For D9L Shown(1) Clamp. Six used. Put 5P3931 Anti-Seize Compound on the threads of all clamp studs and tighten the clamp nuts to a torque of ... 8.0 0.5 N m (72 4 lb in)(2) Tube Assembly.Before assembly coat the entire outside exposed surface of the tube end of tube assemblies (2) and (3) with 6V4876 Molykote Paste Lubricant.(3) Tube assembly.(4) Bolts that hold support plates on the D9L. Put 2P2506 Thread Lubricant on the threads of the bolts and tighten these bolts after the 3/4 inch cylinder head bolts are given final torque.772B, 773B
Earlier(1) Clamp. Two used. Tighten the clamp nuts to a torque of ... 14 3 N m (135 27 lb in)(2) Apply a thin layer of 2P2333 Manifold Sealer to the outside diameter of male member of joint before assembly.
Later(1) Clamp. Two used. Tighten the clamp nuts to a torque of ... 14 3 N m (135 27 lb in)(2) Clamp. Four used. Tighten the clamp nuts to a torque of ... 7.5 1.0 N m (66.37 8.85 lb in)