VALVE GP-CONTROL 3823298 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 422-5472 Lifting Eye Assembly 2
B FT-3307 Installation Tool 1
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g06238979Note: Note the position of the wiring harness clips.
If necessary, remove housing (7).
Illustration 2 g06238900
Install Tooling (B) and a suitable lifting device to torque converter (6). The weight of torque converter (6) is approximately 109 kg (240 lb).Note: The torque converter needs to make three spline connections and spin freely to be properly seated.
Install torque converter (6) Remove the suitable lifting device and Tooling (A).
Position a new gasket and reinstall housing (7).
Illustration 3 g06238879
Install retaining ring (5).
Illustration 4 g06238867Note: Install a new retaining ring (3) Do not reuse old retaining ring (3).
Install plate (4). Install retaining ring (3).
Illustration 5 g06239001Note: Typical Example.
Illustration 6 g06239011Note: Typical Example.
Install the O-ring seals onto pilot (2). Using Tooling (B) install pilot (2). Install retaining ring (1).End By:
Install the transmission.