VALVE GP-CONTROL 3893120 - Caterpillar

Illustration 1 g03790939
Typical example
Table 1
Specification For 323-8755 Track Link As and 289-0270 Track Link As
Item Qty Part Specification Description
- - - Use the following procedure to tighten the track bolts:
1. Tighten the track bolts to 170 40 N m (125 30 lb ft).
2. Tighten the track bolts to an additional turn of 120 5 degrees.
- - - The maximum assembly force for the track link assembly is 400000 N (89924 lb).
- - - The reference setting force is 340000 N (76435 lb).
A - - Distance between the bolt hole is 103.80 0.39 mm (4.087 0.015 inch).
B - - Distance between the bolt holes is 143.80 0.39 mm (5.661 0.015 inch).
C - - Distance between the bolt holes is 103.80 0.80 mm (4.087 0.032 inch).
D - - Distance between the bolt holes is 143.80 0.80 mm (5.661 0.032 inch).
- - - The plug must not be recessed below the surface of the stopper after assembly.
E - - End play for the link assembly is 0.00 to 0.20 mm (0.000 to 0.008 inch).
F - - Protrusion at one end of the pin is 2.3 0.8 mm (0.09 0.03 inch).
G - - Distance from the end of the pin to the surface of the stopper is 8.0 4.0 mm (0.31 0.16 inch).
H - - Bushing protrusion at each end 1.45 0.13 mm (0.057 0.005 inch).