VALVE GP-MAIN CONTROL 3893138 - Caterpillar

Illustration 1 g03083660 (1) Torque for the 20 bolts ... 270 40 N m (200 30 lb ft) (2) Torque for the eight bolts ... 135 20 N m (100 15 lb ft) (3) Lubricate the bore lightly with the lubricant that is being sealed. (4) Torque for the seven bolts ... 135 20 N m (100 15 lb ft)Note: Bearing assembly (4) is not adjustable. (5) Torque for the eight bolts ... 55 10 N m (41 7 lb ft) (6) Torque for the two bolts ... 475 60 N m (350 44 lb ft) (7) ( 8) Lubricate the bore lightly with the lubricant that is being sealed. (9) Install the lip seal even with the face of the bearing cage. (10) Lubricate the seal lip lightly with the lubricant that is being sealed.
Illustration 2 g01970133 (11) Use a 3.0 0.5 mm (0.12 0.02 inch) continuous bead or spread sealant with a roller.Note: Remove excess sealant that spills over the edge. (12) Torque for the two locknuts ... 25 5 N m (18 4 lb ft) (13) Torque for the 16 bolts that are marked with an X ... 135 20 N m (100 15 lb ft) (14) Torque for the three bolts ... 135 20 N m (100 15 lb ft) (15) Torque for the plug ... 68 7 N m (50 5 lb ft)