VALVE & MOUNTING GP 3904939 - Caterpillar

The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS5201" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code.
Although this Program is to be administered as described above on the Affected Product, parts should be removed from parts stock as soon as possible.
This Revised Service Letter replaces the November 25, 1996 Service Letter. Changes have been made to the Termination Date and Parts Needed.
Termination Date
July 31, 1998Problem
The rear exterior cab trim pieces need to be replaced on certain 824G, 825G, and 826G Compactors and 980G Wheel Loaders. The existing plastic trim pieces on the rear exterior of the cab may warp and/or peal away. New trim needs to be added.
Affected Product
Model & Identification Number
824G (4SN1-326)
825G (6RN1-284)
826G (7LN1-196)
980G (2KR1-Up, 2SR1-Up, 9CM1-Up)
Parts Needed
1 - 1213908 Adhesive1 - 1369351 Trim1 - 1369352 Trim2 - 1369353 Trim (for 826G only)Action Required
Affected Product
1. Remove existing trim and urethane bonding agent.2. Replace 1302678 and 1302679 Trim with 1369351 and 1369352 Trim respectively, using 1213908 Adhesive. On the 826G only, also replace 1292580 with 1369353 Trim.3. Use tape, if necessary, to hold the trim in place as the adhesive sets.Parts Stock
Remove all 1302678 and 1302679 Trims from Parts Stock.
Service Claim Allowances
Affected Product
This is a 3-hour job.
Parts Stock
Submit one claim for all 1302678 and 1302679 Trims removed from parts stock.
US and Canadian Dealers Only - When submitting a Parts Stock claim use 99Z00001 in the Product Identification Number Field.
Parts Disposition
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.