VALVE GP-CONTROL 3N4485 - Caterpillar

3N4485 VALVE GP-CONTROL Caterpillar parts 3192, 7261, 7271

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3N4485
3N-4485
3N4485

Weight: 18 pounds 8 kg.

Buy VALVE GP-CONTROL 3N4485 Caterpillar genuine, new aftermarket tractor parts with delivery
MARINE GEAR, MARINE TRANSMISSION,

Compatible equipment models: 3N4485:

MARINE GEAR 3192

MARINE TRANSMISSION 7261 7271 Caterpillar

Number on catalog scheme: None

Caterpillar 3N4485 Parts scheme VALVE GP-CONTROL

For full view, you need register

Information:

The Electronic Control Module (ECM) detects the following conditions:
The ECM has been powered for two seconds.
The signal voltage from the intake manifold pressure sensor is above 4.95 Volts DC for at least two seconds.System Response:A warning will appear on the display on the control panel. The ECM will log the diagnostic code. The data for the intake manifold pressure will be set to a maximum valid pressure for two seconds. The ECM will then flag the intake manifold pressure as being invalid. A default value is then used for the intake manifold pressure.The current for the wastegate solenoid will be set to a default value while this code is active. This will cause the engine to have poor acceleration but the default setting will prevent any overpressure in the intake manifold which could be caused by an overspeed of the turbocharger.Possible Performance Effect:NoneTroubleshooting:This code can be caused by an open circuit or a short to another power source.Test Step 1. Perform the following diagnostic procedure: "Engine Pressure Sensor Open or Short Circuit - Test"Results:
OK - STOP