VALVE GP-SHUTOFF 4215423 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Stud
1/2 - 13 NC by 6 inch 2
If necessary, remove the belt from the engine. Refer to Operation and Maintenance Manual, "Belts - Inspect/Adjust/Replace".
Illustration 1 g02746442
Remove bolts (1) at Location (X) and install Tooling (A).
Remove remaining bolts (1) and the spacer.
Attach a suitable lifting device onto damper (2). The weight of damper (2) is approximately 34 kg (75 lb).
Slide damper (2) forward and remove.
Illustration 2 g02746459
Attach a suitable lifting device onto damper (3). The weight of vibration damper (3) is approximately 34 kg (75 lb).
Remove the spacer and slide damper (3) forward and remove.
Remove bolts (5) and adapter (4). Installation Procedure
Install dampers (2) and (3) in the reverse order of removal.
Tighten bolts (1) to a torque of 135 20 N m (100 15 lb ft).