VALVE-CHECK 4215683 - Caterpillar

Table 1
Required Tools Qty
9U-7191 Plastic Cap 1
269-8297 Cleaner (1)
N/A Hose Clamp 1
(1) The NRS cooler capacities are listed in Table 2.
Block the NRS cooler at one end. Use the 9U-7191 Plastic Cap and a hose clamp of the correct size.
Illustration 1 g02150024
Fill the NRS cooler with 269-8297 Cleaner until the cooler is filled. Refer to Table 2 for the capacities of the NRS coolers.
Table 2
Capacity per NRS Cooler
C9 1.5 L (1.6 qt)
C13, C27, and C32 1.75 L (1.8 qt)
C15, C18, and 3512 2.6 L (2.7 qt)
Allow the filled cooler to sit for 30 minutes.
Drain the 269-8297 Cleaner from the cooler.
Remove the 9U-7191 Plastic Cap and the hose clamp.
Illustration 2 g02150027
Steam the cooler from the inlet of the cooler. Soot and steam will flow from the outlet end of the cooler.
Illustration 3 g02150029
Steam the cooler from the outlet end of the cooler. Soot and steam will flow from the inlet of the cooler.
Repeat Step 6 and Step 7 until the water that is exiting the ends of the cooler is clear.
Dry the NRS cooler by blowing compressed air through each end of the cooler.
Reinstall the cooler with the procedure in the Disassembly and Assembly manual.