VALVE 4419899 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 1
B - Guide Stud
(M16 x 2 x 110 mm) 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01028561
Fasten Tooling (A) and a suitable lifting device to flywheel (2). The weight of flywheel (2) is approximately 48 kg (105 lb).
Remove top bolt (1) and discard. Install Tooling (B). Remove remaining bolts (1) and discard. Remove flywheel (2) from the crankshaft.
Illustration 2 g01028586
Inspect flywheel ring gear (3). Replace the flywheel ring gear, if necessary. Place flywheel (2) on a wood block. Use a hammer and a punch to remove the flywheel ring gear.