VALVE AS 4513901 - Caterpillar

Removal Procedure
Illustration 1 g03386110
Typical example
Cut cable strap (1) from harness assembly (2).
Disconnect harness assembly (2) from harness assembly (5).
Cut cable strap (3) and remove voltage load protection module (4) from the bracket. Installation Procedure
Ensure that all components are clean and free from wear and damage. If necessary, replace any components that are worn or damaged.
Illustration 2 g03386110
Typical example
Position voltage load protection module (4) onto the bracket. Ensure that the voltage load protection module is correctly orientated.
Use a new cable strap (3) to secure the voltage load protection module (4) to the bracket. Note: Ensure that the cable strap meets the Original Equipment Manufactures (OEM) specifications.
Connect harness assembly (2) to harness assembly (5).
Install a new cable strap (1) for harness assembly (2) and harness assembly (5). Note: Ensure that the cable strap meets the OEM specifications.